JVC DR-MH30B, DR-MH20B manual When using your unit as the source player

Engage the Play mode of the source player. Engage the Record mode of the recording deck.

Filename [DR-MH30EU_09Editing.fm]
DR-MH30EU_00.book Page 62 Thursday, June 3, 2004 11:00 AM	Masterpage:Left+

62 EN EDITING

	Edit To Or From Another Recorder	Slide the TV/CABLE/SAT/DVD switch to DVD.
		1 Connect another recorder’s 21-pin SCART connector to the
You can use your unit as the source player or as the recording
		unit’s 21-pin SCART connector as illustrated.
deck.
		A When using your unit as the source player:

NOTE:			— connect its L-1 IN/OUT connector to the recording deck.
When using another recorder as the recording deck, refer to its			B When using your unit as the recording deck:
instruction manual.			— connect its L-2 IN/DECODER connector to the source
A When using your unit as the source player:			player.
			● If another recorder is compatible with the Y/C signal:
TV receiver	Player	Your unit	— when using your unit as the source player, set “L-1 OUTPUT” to
			“SCART S-VIDEO”. ( pg. 63)
			— when using your unit as the recording deck, set “L-2 SELECT” to
			“S-VIDEO”. ( pg. 63)
			2 When using this unit as the recording deck, press HDD or DVD
			to select the recording deck.
	21-pin SCART cable		3 When using this unit as the recording deck, press PR +/– to
	(provided)		select “L-2”.

● Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. ( pg. 63)

21-pin SCART cable (not provided)

Another recorder

4 When using this unit as the recording deck, press REC MODE repeatedly to set the recording mode.

5

6

7 Stop recording on the recording deck, then stop playback on the source player.

	Recorder		NOTES:
			● All necessary cables can be obtained from your dealer.
B When using your unit as the recording deck:			● For Y/C signal input/output, be sure to use a 21-pin SCART cable
			that is compatible with the Y/C signal.
			● When you use this unit as the source player for editing, be sure to set
TV receiver	Recorder	Your unit	“SUPERIMPOSE” to “OFF” before starting. ( pg. 71)
			● If you are using another recorder with S-Video and Audio output
			connectors, connect its S-Video and Audio output connectors to this
			unit’s S-VIDEO and AUDIO input connectors on the front panel.
			Then, set the unit’s input mode to “F-1” in step 3, and set “F-1 INPUT”
			to “S-VIDEO”. ( pg. 64)
	21-pin SCART cable
	(provided)
21-pin SCART cable
(not provided)

Another recorder

Player

Page 62

Thursday, 3 June 2004 10:46