JVC DR-MH20B, DR-MH30B manual Clock Set, Just Clock

DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP

TUNER SET CLOCK SET

Filename [DR-MH30EU_10Subsidiary.fm]
DR-MH30EU_00.book Page 75 Thursday, June 3, 2004 11:00 AM	Masterpage:Right+

SUBSIDIARY SETTINGS EN 75

	Clock Set	7 Press SET UP to start the clock operation.
		NOTES:
		● Just Clock (when set to “ON”) adjusts the unit’s built-in clock every
		hour, except for 23:00, 0:00, 1:00 and 2:00.
IMPORTANT:
		● Just Clock is not effective when:
If you performed Auto Set Up ( pg. 20) or Preset Download
		— the unit’s power is on.
( pg. 21), without ever having set the clock previously, the
		— the unit is in the Timer mode.
unit’s built-in clock is also set automatically.
		— a difference of more than 3 minutes exists between the built-in
Perform the following steps only if —
		clock’s time and the actual time.
— Auto Clock Set has not been performed correctly by Auto Set
		— the unit is in the Automatic Satellite Programme Recording
Up or Preset Download.
		mode. ( pg. 50)
OR
		— the unit is in the Power Save mode. ( pg. 71)
— you want to change Just Clock setting. ( “Just Clock” in the
		— “L-2 SELECT” is set to “SAT VIDEO” or “SAT S-VIDEO”.
right column)
		( pg. 63)
		● If Just Clock is set to “ON”, the unit’s clock is automatically adjusted
● Turn on the unit.		at the start/end of Summer Time.
		● Just Clock may not function properly depending on the reception
● Turn on the TV and select the AV mode.
		condition.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
		Just Clock
	CABLE/DBS

TVDVD

ENTER

rtwe

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option can be set to “ON” or “OFF” at the Clock Set screen (the default setting is “OFF”).

IMPORTANT:

If you turn off Just Clock, the accuracy of your unit’s built-in clock may be reduced, which could adversely effect timer recording. We recommend you to keep Just Clock on. In cases where the clock setting data from a PDC signal is incorrect, however, you are advised to keep Just Clock set to “OFF”.

SET UP

1 Press SET UP to access the Main Menu screen.

2 Press w e to select “INITIAL SET UP”, then press ENTER.

3 Press w e to select “CLOCK SET”, then press ENTER.

4 Press rt to select “YEAR”, then press ENTER. Press rt to set the year, then press ENTER.

●Repeat the same procedure to set

YEAR	2004
DATE	01. 01(THU)
TIME	--:--
JUST CLOCK	OFF
TV PROGRAMME	1

the date and time.	SET UP	ENTER	SELECT WITH [ ] THEN PRESS [ENTER]
● When you set the date, press and	EXIT	SELECT	PRESS [SET UP] TO EXIT
hold rt to change the date by 15
days.

●When you set the time, press and hold rt to change the time by 30 minutes.

5 Press rt to select “JUST CLOCK”, then press ENTER. Press rt to set to the desired mode, then press ENTER.

●The default setting is “OFF”.

●For the Just clock function, refer to “Just Clock” on the right column.

●If you set to “OFF”, you can disregard the next step as you won’t be able to receive regular clock adjustments.

6 Press rt to select “TV PROGRAMME”, then press ENTER. Press rt to set the channel position to the number representing the station transmitting clock setting data, then press ENTER.

●The unit is preset to receive clock setting and adjustment data from channel position 1.

Page 75

Thursday, 3 June 2004 10:46