Filename [DR-MH30EU_04Name.fm]
Masterpage:Left+
12 EN INDEX
Page 12 Thursday, 3 June 2004 10:46
Rear View
AAntenna Connectors (ANTENNA IN/OUT) 墌pg. 19
BComponent Video Output Connectors (COMPONENT
VIDEO OUT) 墌pg. 19
CS-video Output Connector (S-VIDEO OUT) 墌pg. 19, 62
DAudio Output Connectors (AUDIO OUT (RIGHT/LEFT))
墌pg. 62
EAV COMPU LINK Connector*
* Not function with this unit.
FDigital Audio Output Connectors
(DIGITAL OUT (COAXIAL/OPTICAL)) 墌pg.64, 68
GCooling Fan
●This prevents the temperature from rising inside the unit.
Do not remove it.
●Install the unit so as not to block the area around the fan.
●The cooling fan on the rear of the unit may be activated even if
the unit is turned off in the following cases;
— In the Automatic Satellite Programme Recording standby
mode (墌pg. 50), slightly before the starting time of PDC
recording (墌pg.47)
— If you connect the decoder or the satellite receiver to L-2 IN/
DECODER and if “L-2 SELECT” is set to “DECODER” or “SAT
VIDEO” or “SAT S-VIDEO”. (墌pg.63)
— when “JUST CLOCK” is set to “ON” (墌pg. 75)
(Set “JUST CLOCK” to “OFF” if you mind the noise of the fan.)
HMains Power Cord 墌pg.19
IL-1 Input/Output Connector (L-1 IN/OUT) 墌pg. 19, 62,
63, 67
JL-2 Input/Decoder Connector
(L-2 IN/DECODER) 墌pg. 25, 62, 67
KSatellite Control Connector (SAT CONTROL) 墌pg.25
LRegion Number Label 墌pg. 7
AEFCDBGHJK LIDR-MH30EU_00.book Page 12 Thursday, June 3, 2004 11:00 AM