Filename |
|
Masterpage:Right0 | |
|
Mode Set
SUBSIDIARY SETTINGS EN 69
* The boldface settings below indicate the settings at your purchase.
AUDIO OUTPUT
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/SAT/DVD switch to DVD.
CABLE/DBS
TV
DVD
8DIGITAL AUDIO OUT — DOLBY DIGITAL/PCM / STREAM/
PCM / PCM ONLY
Set to the appropriate mode according to the type of the device connected to DIGITAL OUT connector.
DOLBY DIGITAL/PCM: Select this when you connect the digital input connector of a Dolby Digital decoder or an amplifier with a
STREAM/PCM: Select this when you connect the digital input connector of an amplifier with a
PCM ONLY: Select this when you connect the linear PCM digital input of other audio equipment (amplifier, MD or DAT deck, etc.).
ENTER
rtwe
SET UP
8ANALOG AUDIO OUT — STEREO / DOLBY SURROUND
Select the appropriate setting to accommodate the unit to the connected A/V equipment. This function takes effect when a DVD VIDEO disc is played back.
STEREO: Select this when listening to conventional
DOLBY SURROUND: Select this when listening to multichannel surround audio with the unit’s AUDIO OUT connectors connected to an amplifier/receiver with a
Various modes of this unit are categorized into menus nested in 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu (for details on each menu, see pages 69 through 70), then follow the procedure below.
DVD VIDEO SET UP | LANGUAGE SET ( pg. 23) |
| AUDIO OUTPUT ( pg. 69) |
| PARENTAL LOCK ( pg. 36) |
| DISC PLAY SET UP ( pg. 70) |
|
|
HDD/DVD SET UP | HDD SET UP ( pg. 70) |
| DVD SET UP ( pg. 70) |
| DISC SET UP ( pg. 76, 77) |
|
|
FUNCTION SET UP | REC/PLAY SET UP ( pg. 70) |
| DISPLAY SET ( pg. 71) |
| VIDEO IN/OUT ( pg. 24, 63) |
|
|
INITIAL SET UP | TUNER SET ( pg. 72) |
| CLOCK SET ( pg. 75) |
|
|
●The procedure below shows how to set the desired option of the “AUDIO REC” mode as an example.
1 Press SET UP to access the Main Menu screen.
2 Press w e to select “FUNCTION SET UP”, then press ENTER.
3 Press w e to select “REC/PLAY |
|
|
|
| |||
DVD VIDEO SET UP | HDD/DVD SET UP | FUNCTION SET UP | INITIAL SET UP | ||||
SET UP”, then press ENTER. | REC/PLAY SETUP | DISPLAY SET | VIDEO IN/OUT | CONECT | |||
4 Press rt to select “AUDIO |
|
|
|
|
|
|
|
| XP MODE REC AUDIO |
| DOLBY DIGITAL |
| |||
|
|
|
|
|
|
| |
REC”, then press ENTER. |
| AUDIO REC |
| NICAM |
| ||
|
|
|
|
|
|
| |
5 Press rt to select the desired |
| DIRECT REC |
|
| OFF |
| |
|
|
|
| ||||
| JUMP TIME |
| 15 MIN |
| |||
|
|
|
|
|
|
| |
option, then press ENTER.
6 Press SET UP to complete the | SET UP | ENTER | SELECT WITH [ | ] THEN PRESS [ENTER] |
EXIT | SELECT | PRESS [SET UP] TO EXIT | ||
setting.
8D. RANGE CONTROL — NORMAL / WIDE RANGE /
TV MODE
The dynamic range (the difference between the loudest sound and the quietest one) can be compressed during playback of a programme encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume.
NORMAL: Normally select this setting to activate this function.
WIDE RANGE: Select this to deactivate this function when you enjoy wide dynamic range programme.
TV MODE: Select this when you hear the sound through the TV’s speaker(s).
NOTES:
●This function takes no effect on programmes other than that recorded in Dolby Digital format.
●This function dose not work when Simulated Surround Effect is activated. ( pg. 34)
●The effect of “NORMAL” and “WIDE RANGE” may not be different depending on discs.
8OUTPUT LEVEL — STANDARD / LOW
You can lower the output level of analog audio to accommodate the unit to the connected A/V equipment.
STANDARD: Normally select this setting.
LOW: The output level of analog audio is lowered.
Page 69 |
Thursday, 3 June 2004 10:46 |
