JVC DT-V17G1 Menu Configuration-MAIN MENU cont, Settings of “E.AUDIO GROUP”, Audio Setting

Menu Configuration—MAIN MENU (cont.)

For the operation procedure, see page 7.

Adjustment bar

Displayed when selecting

Operation guide“BALANCE.” Shows the buttons for each

operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Settings of “E.AUDIO GROUP”

The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows.

(G means GROUP)

1G: channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)

2G: channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)

1-2G:channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G)

3G: channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)

1-3G:channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/1 – 4 (1G)/5 – 8 (2G)/ 9 – 12 (3G)/1 – 8 (1G+2G)/1 – 12 (1-3G)

Example of the level meter display—Level meter position and audio channels

Ex.: When “LEVEL METER ch” is set to “LINE” and “BAR TYPE” is set to “3COLORS”

OVER LEVEL REFERENCE LEVEL

Red

Yellow

Green

•The level meter with no audio signal input is displayed in white for “3COLORS”, and in gray for “W.100.”

•You can select the position of the level meter display—top or bottom of the screen. (☞ “POSITION” in “INFORMATION” on page 18)

•When “PEAK HOLD” is set to “ON,” the maximum level meter value will remain displayed for a set period of time. (At the time the signal input level reaches the highest value.)

14

AUDIO SETTING

Settings for the audio output balance, EMBEDDED AUDIO signals and level meter

Item		To do	Setting value
BALANCE		Adjust the balance between the right and left speakers.	L5 – L1, 0, R1 – R5
E.AUDIO GROUP*1		Select the audio channel group of the EMBEDDED AUDIO	☞ “NOTE”
		signals.
LEVEL METER		Adjust the level meter display for the EMBEDDED AUDIO	☞ “NOTE”
SETTING*1		signals.
	LEVEL METER ch	Select how the audio channels are displayed on the level	OFF, LINE (Displays
		meter.	the channels 1 – 6 at
			the left of the screen
			and 7 – 12 at the right.),
			DIVIDE (Displays the odd
			channels at the left of
			the screen and the even
			channels at the right.)
	BAR TYPE	Select the color of the level meter display.	3COLORS (3 colors to
			indicate variations in input
			levels), W.100 (white)
	REFERENCE	Select the standard input level indicated on the level meter.	–20dB, –18dB
	LEVEL
	OVER LEVEL	Select the input level’s lower limit indicated in red for the	–10dB, –8dB, –6dB,
		“3COLORS” display.	–4dB, –2dB
	BAR	Select the brightness of the level meter.	LOW, HIGH
	BRIGHTNESS
	PEAK HOLD	Activates/deactivates the peak hold function of the level	OFF, ON
		meter.

*1 Memorized for each input.