Setting of “CHARACTER SET.”, Information

For the operation procedure, see page 7.

Operation guide

Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Setting of “CHARACTER SET.”

Assign a name for each video source.

1Change the input to one that you want to assign a video source name for.

2 Select “CHARACTER SET.”

3Press buttons to select the first character.

•Each time you press button, the character changes as follows. Press button to reverse the order.

Space

4Press button to move the arrow to the next space.

• The characters entered before moving the arrow are memorized.

5Repeat steps 3 and 4 (10 characters at maximum).

6Press MENU button to store the name.

REMOTE SETTING (☞ “External Control” on pages 20 to 23)

Settings for the external control

Item	To do	Setting value
SERIAL TYPE	Select the input terminal used for external control by	RS232C, RS485
	serial communication.
PARALLEL TYPE	Select the external control method for the MAKE/	MAKE, TRIGGER, SET
	TRIGGER terminal.
PIN1	Assign the control functions to the pins of the MAKE/	☞ “Functions controlled by the
PIN2	TRIGGER terminal.	MAKE/TRIGGER system” on
PIN3	• Assign a function to each pin terminal by selecting	page 21
PIN4	“SET” in “PARALLEL TYPE” mentioned above.
PIN5	(The functions are assigned for “PIN6” – “PIN8”
	and you cannot change the assignment of these
	functions.)

Settings for the information display of the monitor

Item	To do	Setting value
POSITION	Select the position to show the information display. (☞ “On the	UPPER, LOWER
	Information Display” on page 7)
SOURCE ID	Select whether the name assigned in “CHARACTER SET.” is	OFF, ON, AUTO
	displayed on the screen. (☞ “On the Information Display” on page 7)
	• When “AUTO” is selected, the display color synchronizes with the
	color of the tally lamp while the tally lamp is lit.
CHARACTER	Assign a name to each video source as you like (10 characters at	☞ “NOTE”
SET.*1	maximum). You can also enter a name using the RS-232C system.
STATUS DISPLAY	Select whether the status of the current input and the setting of	AUTO, OFF, ON
	muting are displayed on the screen. (☞ “On the Status Display” on
	page 7)
TIME CODE	Select the type of the TIME CODE display.	VITC2, LTC2,
		D-VITC
CRC ERROR	Select whether the CRC error indication for the input HD SDI signal is	ON, OFF
	displayed on the screen. (☞ “On the Information Display” on page 7)
SUB HOUR METER	Display the hours of use (unit: hour). You can reset this item.
MODEL	Display the model name of the monitor.
VERSION	Display the version of the monitor.
HOUR METER	Display the total hours of use (unit: hour). This item is used for maintenance of the
	monitor. You cannot reset this item.

*1 Memorized for each input. *2 Ancillary time code