JVC DT-V17G1 specifications Settings of “sub menu POSI.”, Function Setting, Picture Sub Adj

Menu Configuration—SET-UP MENU

For the operation procedure, see page 7.

Operation guide

Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Settings of “sub menu POSI.”

The setting values and features are as follows.

LOWER1: Displays the current setting and adjustment bar at the lower part of the screen.

UPPER1: Displays the current setting and adjustment bar at the upper part of the screen.

LOWER2: Displays the current setting at the lower part of the screen.

UPPER2: Displays the current setting at the upper part of the screen.

• The adjustment bar is not displayed for some items.

16

FUNCTION SETTING

Settings for the sub menu display, color system, color of the tally lamp, intensity of the button lamps and the PHASE adjustment.

Item	To do	Setting value
sub menu	Select the contents and displaying position of “sub menu.”	☞ “NOTE”
POSI.
COLOR	Select the color system.	AUTO, NTSC, PAL
SYSTEM	• If the picture is unstable with “AUTO,” select “PAL” or “NTSC.”
TALLY SELECT	Select the color of the tally lamp.	GREEN, RED
DIMMER	Select the intensity of the button lamps.	NORMAL, DARK
COMPONENT	Deactivates the function of PHASE adjustment (Picture adjustment knob	ENABLE, DISABLE
PHASE	and “PICTURE SUB ADJ.” in SET-UP MENU) except when an NTSC
	signal comes in (☞ 3 on page 6).

PICTURE SUB ADJ.

Adjusts the standard level for the picture adjustment and selects the set-up level for the input video signal.

Item	To do	Setting value
CONTRAST*1	Adjust the standard level for the contrast adjusted with the	–20 – +20
	CONTRAST knob on the front panel.
BRIGHT*1	Adjust the standard level for the brightness adjusted with the	–20 – +20
	BRIGHT knob on the front panel.
CHROMA*1	Adjust the standard level for the chroma adjusted with the CHROMA	–20 – +20
	knob on the front panel.
PHASE*1, *2	Adjust the standard level for the phase adjusted with the PHASE	–20 – +20
	knob on the front panel.
NTSC SETUP	Select the set-up level of the input NTSC signal.	00 (compliant with
		0% set-up signal),
		7.5 (compliant with
		7.5% set-up signal)
COMPO. LEVEL	Select the level of the analog component signal (480i and 576i only).	B75 (compliant
		with BetacamVTR
		7.5% set-up signal),
		B00 (compliant
		with BetacamVTR
		0% set-up signal),
		SMPTE (compliant
		with M2VTR signals)
sub menu	Display the sub menu which enables you to adjust the items in “PICTURE SUB ADJ.” while
	viewing the actual picture.
reset	Restore the default settings for all the items in “PICTURE SUB ADJ.”

*1 Memorized for each input.

*2 When “COMPONENT PHASE” is set to “DISABLE” and an NTSC signal is input, PHASE can be adjusted.