<Functions controlled by the MAKE/TRIGGER system>
Display | Functions to be controlled | Opening |
|
|
TALLY SEL | Selects the color of the tally lamp. | Green |
| Red |
SDI 1 | Changes the input to “SDI 1.” | Invalid |
| Valid |
SDI 2 | Changes the input to “SDI 2.” | Invalid |
| Valid |
DVI | Changes the input to “DVI.” | Invalid |
| Valid |
COMPONENT | Changes the input to “COMPO.” | Invalid |
| Valid |
VIDEO | Changes the input to “VIDEO.” | Invalid |
| Valid |
Selects the “3G SDI LEVEL B” data stream. | DS 1 |
| DS 2 | |
DUAL LINK | Turns on or off “SDI DUAL LINK.” | Off |
| On |
A.MARKER | The area marker indication | Off |
| On |
S.MARKER | The safety marker indication | Off |
| On |
FRAME | Indication of the area of the specified aspect ratio | Off |
| On |
C.MARKER | The center marker indication | Off |
| On |
MARK.SEL | Selects the items of “MARKER”*3 |
| ||
ASPECT | Changes the aspect ratio. | 4:3 |
| 16:9 |
1:1 | Displays in 1:1 mode. | Off |
| On |
STATUS | Status display*4 | ☞ “On the Status Display” on page 7 | ||
L.METER | Audio level meter display |
| *5 | |
TIME CODE | Time code display | Off |
| On |
SOURCE ID | ☞ “SOURCE ID” in “INFORMATION” on page 18 |
| *6 | |
WAVE FORM | Wave form monitor display |
| *7 | |
VECTOR | Vector scope display |
| *7 | |
COLOR OFF | Color off | Color |
| Monochrome |
SCR CHECK | Screens check |
| *8 | |
I/P MODE | Change a mode according to a input picture. |
| *9 | |
MUTING | Muting on/off | Off |
| On |
DIMMER | Change the intensity of the button lamps. | NORMAL |
| DARK |
– – – | No function | — |
| — |
*3 Selects which functions in “MARKER” are activated,
Display” on page 7). While controlling with the MAKE system, the information is displayed only at the moment of
*5 While controlling with the MAKE system, the level meter is switched between displayed
While controlling with the TRIGGER system, the pattern of the audio channel display is switched.
*6 While controlling with the MAKE system, the available
*7 While controlling with the MAKE system, the wave form monitor and vector scope is switched between displayed
*8 While controlling with the MAKE system, the screen is switched between normal screen (opening) and blue screen
*9 Must be controlled with the TRIGGER system. The mode changes in the order of “NORMAL” \ “CINEMA” \ “FIELD.” (This function cannot be controlled with the MAKE system.)
•You cannot assign the same function to different pin terminals.
•The TRIGGER system switches each function by
ENGLISH21