JVC DT-V17G1 specifications all reset, Operation guide

Operation guide

Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

CONTROL LOCK Setting value: OFF, VOL.LOCK, ALL LOCK

Settings for disabling the buttons on the front panel.

•The following operations are not available when “VOL.LOCK” is selected.

–VOLUME adjustment knob

–Picture adjustment knob

•The “ALL LOCK” function disables to control the buttons on the front panel. But following operations are available.

–Turning on/off (on standby) the monitor

–Displaying the SET-UP MENU (by pressing button while holding button) and turning “CONTROL LOCK” to “OFF”

–Operating the monitor by an external control

If you try other operations, “ Control lock on!” appears on the screen.

DVI INPUT SEL. Setting value: AUTO, COMPO., RGB, PC

When “AUTO” is selected, the format of signals come in to the DVI-D (HDCP) terminal is automatically recognized. (Normally, select “AUTO.”)

•Select “COMPO.,” “RGB” or “PC” when the picture is not displayed correctly with “AUTO.”

•DVI-D input of the monitor is compatible with HDCP.

all reset

Restores all the settings and adjustments of the monitor to the default.

•“HOUR METER” and the settings done by using the adjustment knobs on the front panel will not be reset.

•When you operate the monitor with the AC power supply, the monitor is turned off (on standby) then turned on automatically. When you operate the monitor with the DC 12 V power supply, the monitor is turned off (on standby).

ENGLISH19