JVC DT-V17G1 specifications Specifications, General, LCD panel, Input/output terminals

Specifications

7 General

Model name	DT-V17G1
Type	Multi format LCD monitor
Screen size	Type 17 wide format
Aspect ratio	16 : 9
Horizontal/vertical frequency	H: 31.469 kHz – 75.000 kHz
(computer signal)	V: 48 Hz – 65 Hz
	* Some signals within this frequency range may not be displayed (“Out of
	range” is displayed).
Compliant video signal format	☞ “Available signals” on page 10
Format	3G SDI:	SMPTE424M/SMPTE425M
	DUAL LINK HD SDI:
		SMPTE372M
	HD SDI: BTA S-004C, SMPTE292M
	SD SDI:	ITU-R BT.656: 525/625
		SMPTE259M: 525
	EMBEDDED AUDIO:
		SMPTE299M, SMPTE272M
Audio output	Internal speaker: 1.0 W + 1.0 W
Operating conditions	Operating temperature: 5°C – 35°C (41°F – 95°F)
	Operating humidity: 20% – 80% (non-condensing)
	(Slightly variable depending on ambient conditions for installation.)
Power requirements	AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz
	DC 12 V – 17 V
Rated current	1.2 A (AC 120 V) / 0.8 A (AC 220 – 240 V)
	5.0 A (DC 12 V– 17 V)
External dimensions	Width:	430 mm (17˝) (with the stand)
(excluding protruding parts)		430 mm (17˝) (without the stand)
	Height:	349.8 mm (13 7/8˝) (with the stand)
		309 mm (12 1/4˝) (without the stand)
	Depth:	199 mm (7 7/8˝) (with the stand)
		102 mm (4 1/8˝) (without the stand)
Weight	8.6 kg (18.9 lbs) (with the stand)
	6.8 kg (15.0 lbs) (without the stand)
Accessories	AC power cord, Power cord holder x 1, Screw x 2 (for power cord holder),
	Ferrite core x 1 (for external battery)

Notice on transportation

This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.

Use the Anton Bauer Dionic 90 (mount: QR DXC-M3A) external battery.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

26

7 LCD panel

Type	17˝ wide, active matrix TFT
Effective screen size	Width: 372.9 mm (14 3/4˝)
	Height: 209.7 mm (8 3/8˝)
Number of pixels displayed	1366 x 768
Number of colors displayed	16.77 million
Viewing angle (TYP.)	178° (Horizontally), 178° (Vertically)
Brightness (TYP.)	350 cd/m2
Contrast ratio (TYP.)	900:1

7Input/output terminals

	VIDEO	Input/output of composite signal:
		1 line, BNC connector x 2,
		1 V(p-p), 75 Ω
		* The input (IN) and output (OUT) terminals are bridge-
		connected (auto termination).
	DVI-D (HDCP)	DVI-D signal input (compatible with HDCP):
		DVI-D connector x 1 (compatible with DDC2B)
Video	COMPO. (Y, PB/B-Y, PR/R-Y)	Input/output of analog component signal:
		1 line, BNC connector x 6
		Y: 1 V(p-p), 75 Ω
		PB/B-Y, PR/R-Y: 0.7 V(p-p), 75 Ω
		* The input (IN) and output (OUT) terminals are bridge-
		connected (auto termination).
	E. AUDIO HD/SD SDI (IN 1)	Digital signal input (compatible with EMBEDDED AUDIO signals / DUAL LINK):
	E. AUDIO HD/SD SDI (IN 2)	auto detection, 2 line, BNC connector x 2
	E. AUDIO HD/SD SDI	Digital signal output (compatible with EMBEDDED AUDIO signals):
	(SWITCHED OUT)	1 line switched out, BNC connector x 1
Audio	AUDIO (IN)	Analog audio signal input:	1 line, RCA connector x 2,
			500 mV (rms), high impedance
	AUDIO (MONITOR OUT)	Analog audio signal output:	1 line, RCA connector x 2,
			500 mV (rms)
External control	REMOTE (MAKE/TRIGGER)	☞ “Using the MAKE/TRIGGER system” on page 20
	REMOTE (RS-485)	☞ “Using the serial communication” on page 22
	REMOTE (RS-232C)

•For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different from actual products.

•Design and specifications are subject to change without notice.

•All company names and product names mentioned herein are used for identification purposes only, and may be the trademarks or registered trademarks of their respective companies.