Setting of “E.AUDIO GROUP”, ENGLISH11, Audio Setting

Operation guide Shows the buttons for each operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Setting of “E.AUDIO GROUP”

The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows. 1G: channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)

2G: channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)

1-2G:channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G)

3G: channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)

1-3G:channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/1 – 4 (1G)/5 – 8 (2G)/9 – 12 (3G)/1 – 8 (1G+2G)/1 – 12 (1-3G)

Setting for the audio channel group of the EMBEDDED AUDIO signals and level meter

Item	To do	Setting value
E.AUDIO GROUP	Select the audio channel group of the	☞ “NOTE”
	EMBEDDED AUDIO signals.
BAR POSITION	Select the type of the level meter display	VERT. (vertically), HORZ. (horizontally)
	— vertically or horizontally.
LEVEL METER ch	Select the number of the audio channels	OFF, 12CH, 8CH
	displayed on the level meter.
CH ARRANGE	Select the order of the audio channels	LINE, DIVIDE (☞ “NOTE”)
	displayed on the level meter.
BAR TYPE	Select the color of the level meter display.	3COLORS (3 colors to indicate variations in
		input levels), W.100 (white), W.50 (half tone)
REFERENCE LEVEL	Select the standard input level indicated on the	–20dB, –18dB
	level meter.
OVER LEVEL	Select the input level’s lower limit indicated in	–10dB, –8dB, –6dB, –4dB, –2dB
	red for the “3COLORS” display.
BAR BRIGHTNESS	Select the brightness of the level meter.	LOW, HIGH

Setting for the monitor performance when no signal comes in

Item	To do	Setting value
NO SYNC ACTION	Select the screen status when no signal is	OFF,
	coming in.	P.SAVE (power save mode),
		GRAY B. (gray screen)
DELAY TIME	Select the period until the screen status	30sec., 5min., 15min.
	changes as selected in “NO SYNC ACTION”
	after signals stop coming in.

•Setting “NO SYNC ACTION” to “GRAY B.” saves the power consumption of the back light by half. (The screen color changes to gray.)

Selecting “P.SAVE” saves more power consumption by turning off the back light.

Example of the level meter display—Level meter position and audio channels

Ex.: When “LEVEL METER ch” is set to “8CH” and “BAR TYPE” is set to “3COLORS.”

REFERENCE LEVEL OVER LEVEL

Red	Green
	Yellow

Ex.: BAR POSITION: HORZ.,

CH ARRANGE: LINE

OVER LEVEL

Red

Yellow

Green

REFERENCE LEVEL

Ex.: BAR POSITION: VERT.,

CH ARRANGE: LINE

REFERENCE LEVEL
OVER LEVEL		• When “CH ARRANGE” is set
			to “DIVIDE,” a odd channel is
			displayed on the left and an
Red	Green		even channel is displayed on the
Red	Green		right.
Yellow			right.
Yellow		• When “BAR TYPE” is set
Ex.: BAR POSITION: HORZ.,		• When “BAR TYPE” is set
Ex.: BAR POSITION: HORZ.,			to “W.100” or “W.50,” the
CH ARRANGE: DIVIDE			to “W.100” or “W.50,” the
CH ARRANGE: DIVIDE			standard input level set in
			standard input level set in
OVER LEVEL			the “REFERENCE LEVEL” is
OVER LEVEL			displayed with the line indication.
Red			displayed with the line indication.
Yellow			The input level set in “OVER
Yellow			LEVEL” is not displayed.
Green			LEVEL” is not displayed.
Green		•	The level meter with no signal
		•	The level meter with no signal
			input is displayed in white for
			“3COLORS,” and in gray for
REFERENCE LEVEL			“W.100” or “W.50.”
Ex.: BAR POSITION: VERT.,
CH ARRANGE: DIVIDE