Dimensions Unit mm, Front view, Side view, Rear view

7Dimensions Unit: mm

222.4

186

•When the stand is attached to the higher position.

116

27.5

1.5

185

•When the stand is attached to the lower position.

202

*at the higher position

**at the lower position

tapped hole (3/8˝)

tapped hole (1/4˝)

Image 18

Contents

DT-V9L1D Rating label is on the bottom of the monitor Safety PrecautionsHow to replace the fuse These openings must not be blocked or covered Maintenance Higher position InstallationTo adjust the stand height Align as illustrated To prevent an accidental fall Fix the monitor to a wall by using stringsLower position Fixing the monitor Front panel Press buttons to select an item, then press button Press or button when a menu is not displayedDisplay the menu Press buttons to select an audio channel Rear panel Available signals To detach the cover, release the tab. Tab Picture Improvement Menu Configuration-MAIN MenuSetting of Marker Select and R-MARKER Select Area MARKER*1 Setting of E.AUDIO Group Audio SettingSync Function Picture SUB ADJ Setting of sub menu PosiColor of the format indicator White Balance SET Setting value OFF, on Setting of Character SETSetting for the information display of the monitor Information Using the MAKE/TRIGGER system External ControlAbout the external control Basic command list Using the RS-232C systemCommand outline Specifications of the RS-232C terminal Following are not malfunctions TroubleshootingSelf-check program Flashing Specifications GeneralInput/output terminals Side view Dimensions Unit mmFront view Rear view