ENGLISH
General settings — PSM
You can change PSM (Preferred Setting Mode) items | 3 Adjust the PSM item selected. |
listed in the table below and on page 15. |
|
1 |
|
2 Select a PSM item. | 4 | Repeat steps 2 and 3 to adjust other PSM |
|
| items if necessary. |
| 5 | Finish the procedure. |
Indications | Item | Setting, [reference page] | ||
| ( |
| : Initial) |
|
|
|
|
|
|
DEMO | • | DEMO ON | : The display demonstration will be activated automatically if no | |
Display |
|
|
| operation is done for about 20 seconds, [6]. |
demonstration | • | DEMO OFF | : Cancels. | |
|
|
|
|
|
CLOCK DISP*1 | • | CLOCK ON | : The clock time is shown on the display at all times when the power is | |
Clock display |
|
|
| turned off. |
•CLOCK OFF : Cancels; pressing DISP will show the clock time for about 5 seconds when the power is turned off, [6].
CLOCK HOUR | 1 – 12 | [Initial: 1 (1:00)], [6]. | |
Hour adjustment |
|
|
|
|
|
| |
CLOCK MIN | 00 – 59 | [Initial: 00 (1:00)], [6]. | |
Minute adjustment |
|
|
|
|
|
|
|
DIMMER | • | ON | : Dims the display and button illumination. |
Dimmer | • | OFF | : Cancels. |
*1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended that you select “CLOCK OFF” to save the car’s battery.
14
