JVC GET0483-001A manual Storing your own sound mode

Indication, [Range]

LOUD*4 (loudness), [LOUD ON or LOUD OFF] Boost low and high frequencies to produce a well-balanced sound at a low volume level.

SUBWOOFER*1, [00 to 08, initial: 04]

Adjust the subwoofer output level.

VOL ADJ (volume adjust), [–05 to +05, initial: 00] Adjust the volume level of each source (except FM), in relation to the FM volume level. The volume level will automatically increase or decrease when you change the source.

•Before making an adjustment, select the source you want to adjust.

VOLUME, [00 to 50 or 00 to 30]*5

Adjust the volume.

*1 Displayed only when “L/O MODE” is set to “SUB.W” (see page 15).

*2 If you are using a two-speaker system, set the fader level to “00.”

*3 This adjustment will not affect the subwoofer output. *4 The adjustment made (LOUD ON/LOUD OFF) will be

applied to all sound modes.

*5 Depending on the amplifier gain control setting. (See page 15 for details.)

Storing your own sound mode

You can adjust the sound modes and store your own adjustments in memory.

1Select a sound mode.

2Enter the adjustment mode.

• If no operation is done within

5 seconds, this mode is canceled.

3Select a sound characteristic.

4 Adjust the sound elements of the selected		ENGLISH
sound characteristic.
1	Adjust the frequency.
2	Adjust the level.
3	Adjust the quality slope (Q).

Sound		Range/selectable items
elements		BASS	MID	TRE
Frequency		60 Hz	500 Hz	7.5 kHz
		80 Hz	1.0 kHz	10.0 kHz
		100 Hz	1.5 kHz	12.5 kHz
		120 Hz	2.5 kHz	15.0 kHz
Level		–06 to	–06 to	–06 to
		+06	+06	+06
Q (Q-slope)		Q0.5	Q0.75	Q0.75
		Q1.0	Q1.0	Q1.25
		Q1.5	Q1.25
		Q2.0	Q1.5
BASS: Bass	MID: Mid-range		TRE: Treble

5The adjustment made will be stored automatically. Repeat steps 3 and 4 to adjust other sound characteristics.

13