INDEX Docking Station | EN63 |
46
5
1 
2
3 0
7 8
9
1PC Connector [DIGITAL STILL] ............ pg. 42
2J Terminal/Edit Connector [JLIP (Joint Level Interface Protocol) (EDIT)] .................... pg. 51
•Connect to a
NOTE:
Make sure that the camcorder is turned on while connecting the camcorder to a PC using the Docking Station’s JLIP connector. If the camcorder is turned off (because the POWER Switch is set to “OFF” or due to Auto Shut Off* etc.) while the JLIP program software is used, it will be impossi- ble to control the connected devices from the computer. In such a case, first try turning the camcorder on again, or unplug the JLIP connec- tion cable from the Docking Station’s JLIP connector. Then, initialize or run the software again.
*Auto Shut Off:
If 5 minutes elapse in the
•Connect the editing cable when performing Random Assemble Editing ........ pg. 50 – 55.
3External Stereo Microphone Input
Connector [MIC] | pg. 56 |
4 Stud | pg. 40 |
5 Screw | pg. 40 |
6Multi Connector
The Docking Station can be connected with this camcorder through this connector. Never touch it with your hand or hit it with a hard object; if the pins are damaged, the connectors will become unusable due to contact failure.
7
[S OUT] | pg. 40, 51 |
8Video Output Connector
[VIDEO] | pg. 40, 51 |
9Audio Output Connector
[AUDIO L/R] | pg. 40, | 51 |
0 Screw Knob | pg. | 40 |
To attach the camcorder, tighten this clockwise. | ||
