JVC GRDVM80U, GR-DVM80 Using the Battery Pack, Using AC Power, To Detach The Battery Pack

1

2	BATT. RELEASE
	Switch

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

INFORMATION:

VU-V856KIT is a set composed of the BN-V856U battery pack and AA-V80U AC Power Adapter/Charger.

Read the VU-V856KIT’s instruction manuals before using.

It is impossible to charge the BN-V856U battery pack using the provided AC Power Adapter/ Charger. Use the optional AA-V80U AC Power Adapter/Charger.

To AC outlet Power cord

AC Power

Adapter/Charger

To DC OUT terminal

DC cord

EN9

USING THE BATTERY PACK

1 Insert the terminal end 1 of the battery pack into the battery pack mount, then firmly push the end 2 of the battery pack in the direction of the arrow until it locks into place as shown in the illustration.

•If the battery pack is attached in the wrong position, a malfunction may occur.

To Detach The Battery Pack. . .

.... while sliding down BATT. RELEASE, detach it.

Approximate recording time

Battery pack	LCD monitor on/	LCD monitor off/
	Viewfinder off	Viewfinder on
BN-V507U	55 min.	1 hr. 5 min.
BN-V514U	1 hr. 50 min.	2 hrs. 10 min.
(optional)
BN-V856U	7 hrs. 30 min.	9 hrs.
(optional)

NOTES:

●Recording time is reduced significantly under the following conditions:

•Zoom or Record-Standby mode is engaged repeatedly.

•The LCD monitor is used repeatedly.

•The playback mode is engaged repeatedly.

●Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

USING AC POWER

Use the AC Power Adapter/Charger (connect as shown in the illustration).

NOTES:

●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.

●For other notes,
pg. 8.

To battery pack mount