USER MAINTENANCE | EN57 |
After Use | Cleaning The Camcorder |
1 Turn off the camcorder.
2 Slide down and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically. Remove the cassette.
3 Press “PUSH HERE” to close the cassette holder.
•Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.
4 Slide down BATT. RELEASE 1 and remove the battery pack 23.
Cassette holder
Remove.
PUSH HERE | OPEN/EJECT Switch |
1 To clean the exterior, wipe gently with a soft cloth.
Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.
2 Open the LCD monitor. Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor.
3
4 Pull out the viewfinder fully.
5 Open the viewfinder cleaning hatch in the direction of the arrow 1.
Insert a lens blower or soft cloth into the gap at the side of the viewfinder and clean the interior of the viewfinder with it 2.
6 Close the hatch until it locks in place and push the viewfinder back in.
NOTES:
●Avoid using strong cleaning agents such as benzine or alcohol.
●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.
●Mold may form if the lens is left dirty.
●When using a cleaner or chemically treated cloth refer to the cautions of each product.
1 
2
3 BATT. RELEASE Switch
Hatch |
1 |
Lens blower
2 |
