36 EN | PLAYBACK Basic Playback |
| PO |
|
|
| Play/Pause Button (4/6) | |
| SU | RE | ||||
EX |
|
| ||||
|
|
|
|
| ||
HT |
|
| ||||
| F | |||||
G |
| O |
| |||
I |
|
| ||||
L |
| C |
| |||
K |
|
|
| U |
| |
C |
|
|
| S | Rewind Button (2) | |
B |
|
|
|
| ||
A |
|
|
|
| POWER Switch | |
|
|
|
|
| ||
|
|
|
|
| ||
Stop Button (5) | ||||||
| ||||||
Power Zoom
Lever (VOL.)
MENU Wheel
Speaker
Lock Button
1 Load a tape ( pg. 12).
2 down the Lock Button located on the switch. To start playback, press 4/6.
Set the POWER Switch to “ | PLAY/PC | ” while pressing |
|
•To stop playback, press 5.
•Press 2 to rewind, or 3to
To Control The Speaker Volume . . .
.... slide the Power Zoom Lever (VOL.) towards “+” to
turn up the volume, or towards
NOTES:
●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the POWER Switch
to “OFF”, then to “ | PLAY/PC | ”. |
|
|
●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV ( pg. 40).
●You can also view the playback picture on the LCD monitor with it flipped over and pushed against the camera body.
●LCD monitor/viewfinder indications:
• When power is supplied from a battery: the “
” battery pack remaining power indicator is displayed.
When power is supplied through the DC cord: “ 
” does not appear.
•During Stop mode, none of the indications are displayed.
●When a cable is connected to the AV OUT connector, the sound is not heard from the speaker.
Still Playback: Pauses during playback.
1)Press 4/6during playback.
2)To resume normal playback, press 4/6 again.
●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.
●When 4/6is pressed, the image may not pause immediately while the camcorder stabilizes the still image.
Shuttle Search: Allows
1)Press 3for forward or 2for reverse search during playback.
2)To resume normal playback, press 4/6.
●During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.
●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
1)Engage Still Playback.
2)Rotate the MENU wheel towards “+” for forward
To resume normal playback, press 4/6.
●You can also use the provided remote control for
Slow-Motion Playback, Playback Zoom and Playback Special Effects
Available only with the remote control (provided) ( pg. 48, 49).
