44 EN
POWER Switch
Lock Button
To
OUT
DUBBING
Dubbing To A VCR
| Following the illustration, connect the camcorder and | ||
1 the VCR. Also refer to pg. 40 and 41. |
|
| |
| Set the camcorder’s POWER Switch to “ | PLAY/PC | ” |
2 while pressing down the Lock Button located on the
switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.
3 Engage the VCR’s AUX and
4 Engage the camcorder’s Play mode to find a spot just before the
5 Press 4/6 on the camcorder and engage the VCR’s
Red to
AUDIO R 
OUT
White to
AUDIO L OUT
Audio/Video cable [RCA plug to RCA plug] (optional)
White to
AUDIO L IN
Yellow to
VIDEO
OUT*
Core filter
Yellow to
VIDEO IN*
Record mode.
6 Engage the VCR’s
7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.
NOTES:
●The
•
•Audio/Video cable (RCA plug to RCA plug): YTU94147A
Consult the JVC Service Center described on the sheet included in the package for details on their availability. Make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.
Red to | To |
AUDIO R IN |
VCR
TV |
*Connect when an
●You can use the AV OUT connector on the camcorder for connection.
●You can use Playback Zoom ( pg. 48) or Playback Special Effects ( pg. 49) in step 5.
●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen ( pg. 37).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen ( pg. 37).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu Screen ( pg. 37). Or, press DISPLAY on the remote
