JVC GR-DVM80, GRDVM80U specifications 60 EN, Troubleshooting

60 EN TROUBLESHOOTING (cont.)

SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
17. The picture wipe function	17. • The Slow Shutter mode is	17. • Disengage the Slow Shutter
does not work.	activated.	mode or set “WIDE MODE” to
	• “WIDE MODE” is not set to	“OFF” before preparing to use
	“OFF”.	the Picture Wipe ( pg. 26,
		30, 32).
18. Scene transition does not go	18. • When using “Picture Wipe/	18.
as expected.	Dissolve” ( pg. 30), there is
	a delay of a fraction of a
	second between the previous
	record stop-point and the
	Dissolve start-point. This is	————
	normal, but this slight delay
	becomes especially notice-
	able when shooting fast-
	moving subject or during
	rapid panning.
19. The Video Echo mode does	19. • The Picture Wipe or	19. • Set “WIDE MODE” to
not work.	Dissolve functions are in use.	“CINEMA” or “OFF” mode
	• “WIDE MODE” is set to	( pg. 26).
	“SQUEEZE” or “PS-WIDE” in	• Do not try to use the Video
	the Menu Screen.	Echo mode during a Fade-In
	• A Fade-In or Fade-Out is in	or Fade-Out ( pg. 30, 32).
	progress.
20. Even when Slow Shutter is	20. • When shooting in the dark,	20. • If you want the lighting to
not selected, the image looks	the unit becomes highly	look more natural, set GAIN
like it is activated.	sensitive to light and the	UP to “AGC” or “OFF” in the
	image takes on an effect	Menu Screen ( pg. 25).
	similar to Slow Shutter.
21. There is no strobe when the	21. • The Picture Wipe or Dissolve	21. • Do not try to use the Classic
Classic Film or Strobe mode	function is in use.	Film or Strobe mode during a
is activated.		scene transition ( pg. 30,
		32).
22. White Balance cannot be	22. • The Sepia or Monotone mode	22. • Turn off Sepia or Monotone
activated.	is activated.	before setting White Balance
		( pg. 32, 35).
23. When shooting a subject	23. • This is a result of exceedingly	23.
illuminated by bright light,	high contrast, and is not a	————
vertical lines appear.	malfunction.
24. When the screen is under	24. • This is not a malfunction.	24.
direct sunlight during		————
shooting, the screen becomes
red or black for an instant.
25. During recording, the date/	25. • “DATE/TIME” is set to “OFF”	25. • Set “DATE/TIME” to “ON” in
time does not appear.	in the Menu Screen.	the Menu Screen ( pg. 27).
	• Self-Recording is performed.	• During Self-Recording, the
		date/time does not appear
		( pg. 17).
26. The indicators and messages	26. • “ON SCREEN” is set to	26. • Set “ON SCREEN” to “LCD”
do not appear.	“SIMPLE” or “TIME CODE” is	or “LCD/TV” and set “TIME
	set to “OFF” in the Menu	CODE” to “ON” in the Menu
	Screen.	Screen ( pg. 27, 37).