32 EN | RECORDING Advanced Features (cont.) |
IMPORTANT:
Some modes of Program AE with special effects cannot be used with certain Fade/Wipe Effects ( pg. 31). If an unusable mode is selected, its indicator blinks or goes out.
MODE Dial
POWER Switch
Lock Button
Operation Switch
MENU Wheel
Program AE With Special Effects
Set the Operation Switch to “ ”, then set the | |
1 POWER Switch to “ | ” while pressing down the |
Lock Button located on the switch. Pull out the viewfinder fully or open the LCD monitor fully.
2 Press the MENU wheel. The Menu Screen appears.
3 Rotate the MENU wheel to select “ 
”, then press it.
4 Rotate the MENU wheel to select the desired mode, then press it. Selection is complete.
•The P.AE/EFFECT Menu disappears and the selected mode is activated. The selected mode indicator appears.
To Deactivate The Selected Mode . . .
.... select “OFF” in step 4.
NOTE:
Program AE with special effects can be changed during recording or during
Display
P. AE / E F F ECT
| 1S LOW | 1 | |
| 2S LOW | 2 | |
|
| V I DEO | ECHO |
4 |
| OF F |
|
1/60 | SHUT T ER 1/60 | ||
1/100 | SHUT T ER 1/100 | ||
1/250 | SHUT T ER 1/250 | ||
Menu Screen
