EN7
How To Use Audio Cables
When using an optional external microphone or headphones, connect to the provided Audio cable (with a core filter attached), then connect the Audio cable to the camcorder. The core filter reduces interference.
Microphone |
Headphones |
To |
AV OUT |
Core Filter |
Audio cable |
Core Filter |
To MIC |
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when
“DEMO. MODE” is set to “ON” (factory-preset).
Available when the POWER Switch is set to “ 
” and no cassette is in the camcorder.
Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume.
“DEMO. MODE” remains “ON” even if the camcorder power is turned off.
To cancel Automatic Demonstration, set the Operation Switch
to “ 
” and set the POWER Switch to “ 
” while pressing down the Lock Button located on the switch, then press the MENU wheel twice while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not have to go through the Menu Screen). Rotate the MENU wheel to select “OFF” and press it. The normal screen appears.
MENU Wheel
CAMERA MENU
1RE TURN
REC MODE
SOUND MODE
ZOOM
SNAP MODE
GA I N UP
BEEP / TAL L Y I D NUMBER DEMO. MODE ON
OF F
