Using the Battery

Installing the Battery

1.Insert the battery into the opening on the back of the phone and gently press it down.

2.Place the battery cover, and then slide it upward until you hear it snap into place.

3.Slide the battery cover release lever as indicated in the diagram shown below.

Removing the Battery

Warning! Do not handle a damaged or leaking Li-Ion battery as you can be burned.

1.Make sure the power is off so that you don’t lose any stored numbers or messages.

2.Slide the battery cover release lever as indicated in the diagram shown below and slide the battery cover downward and remove it.

3.Use your thumbnail to lift and then remove the battery as indicated in the diagram.

8

Page 16
Image 16
Sanyo SCP-7050 manual Using the Battery, Installing the Battery, Removing the Battery