Sanyo SCP-7050 manual Adjusting the Phone’s Volume Settings, Adjusting the ringer volume

Models: SCP-7050

1 139
Download 139 pages 58.18 Kb
Page 38
Image 38
Adjusting the Phone’s Volume Settings

Adjusting the Phone’s Volume Settings

Adjusting the ringer volume

1.Select Adjusting the ringer volume1.Select  > Settings > Sounds > Volume > Ringer.Adjusting the Alert Volume > Settings > Sounds > Volume > Ringer.

2.Select a volume level and press Done (left softkey).

Tip: You can adjust the ringer volume in standby mode (or the earpiece

volume during a call) by using 1.Select  > Settings > Sounds > Volume > Advanced Ringer..

Adjusting the Alert Volume

This setting controls the alert volume for 10-4, Voicemail, Messaging, and Calendar/Alarm. You can set the alert volume separately from the ringer volume setting.

1.Select 2.Select 10-4,Voicemail, Messaging, or Calendar/Alarm.Adjusting the Phone’s Receiver Volume1.Select  > Settings > Sounds > Volume > Receiver. > Settings > Sounds > Volume > Advanced Ringer.

2.Select 10-4,Voicemail, Messaging, or Calendar/Alarm.

3.Using the navigation key, select Separate Vol.

4.Select a volume level, and press Done (left softkey).

Adjusting the Phone’s Receiver Volume

1.Select 1.Select  > Settings > Sounds > Volume.2.Select Application, Start-up/Pw-off, or Key Beep.Manual background > Settings > Sounds > Volume > Receiver.

2.Select either Earpiece or Speaker.

3.Select a volume level, and press Done (left softkey).

Adjusting the Application, Start-up/Power-off, or Key Beep Volume

1.Select Manual backgroundManual backgroundManual background > Settings > Sounds > Volume.

2.Select Application, Start-up/Pw-off, or Key Beep.

3.Select a volume level, and press Done (left softkey).

30

Page 38
Image 38
Sanyo SCP-7050 Adjusting the Phone’s Volume Settings, Adjusting the ringer volume, Select Settings Sounds Volume Ringer