Sanyo SCP-7050 manual Selecting Vibrate Pattern, Selecting a Tone Length, Using Voice Prompt

Models: SCP-7050

1 139
Download 139 pages 58.18 Kb
Page 39
Image 39

Selecting Vibrate Pattern

With this feature, you can select vibrate pattern for incoming calls, messages, and schedule alarms.

1.Select > Settings > Sounds > Vibrate Pattern.

2.Select Incoming Calls, 10-4 ,Voicemail,Messaging, or

Calendar/Alarm. The following items require an additional step:

Incoming Calls: select With Caller ID, No Caller ID, or Roaming.

10-4: select 10-4 Calls or 10-4 Missed.

Messaging: select Text, Pic Messaging or Web Alerts.

3.Select a vibrate pattern and press .

Selecting a Tone Length

1.Select > Settings > Sounds > Others > Tone Length.

2.Select Short or Long.

Setting a Start-up/Power-off Tone

1.Select > Settings > Sounds > Others.

2.Select Start-up Tone or Power-off Tone.

3.Select a tone, and press .

Using Voice Prompt

This feature allows you to hear voice prompts Voice-activated dialing, when using Voice Memo, Screen Call setting, etc. (Default Setting is Off.)

1.Select > Settings > Sounds > Others > Voice Prompt.

2.Select On.

Tip: When ringer volume is set to Silence All or Vibrate All, voice prompts cannot be heard.

31

Page 39
Image 39
Sanyo SCP-7050 Selecting Vibrate Pattern, Selecting a Tone Length, Setting a Start-up/Power-off Tone, Using Voice Prompt