Sanyo SCP-7050 manual Setting Up Key Press Echo, Alert Notification, Select Settings Sounds Alerts

Setting Up Key Press Echo

With this feature, you can hear a voice say the numbers when you press the keypad. This feature is available when you are in standby mode.

1.Select > Settings > Sounds > Others > Key Press Echo.

2.Select On or Off.

Note: If the Key Beep is off, you are not able to change this setting. See “Adjusting the Application, Start-up/Power-off, or Key Beep Volume” on page 30.

Alert Notification

Your phone comes with several different options to keep you aware of what’s going on by sounding the alert or ringer.

To set the alerts:

1.Select > Settings > Sounds > Alerts.

2.Select an option and press .

Service to set alert on or off for network services parameter changes.

10-4to set an alert to notify you of 10-4 calls.

10-4 Calls to notify of incoming 10-4 calls.

10-4 Missed to notify of missed 10-4 calls.

Headset Alert to tell if you have the floor using a headset.

Floor Tone Vol. to set the floor tone volume during a call.

Voicemail to set an alert to notify you of voice message(s). Select Ringer Length to set the ringer length of Voicemail notification.

Messaging to set an alert to notify you of text, picture message or Web Alert. Select Ringer Length to set the ringer length of Messaging notification.

Minute Beep to set a minute reminder that beeps ten seconds before the end of each minute during a call.

Signal Fade to set alert to notify you when your phone loses a signal during a call.

32