Sanyo SCP-7050 manual Using Abbreviated Dialing

Using Abbreviated Dialing

Abbreviated Dialing is similar to speed dialing. You can use either of the following abbreviated dialing features.

Ph. Book Match to retrieve any desired number saved in your Contacts by entering only the last three to six digits of the number. This feature becomes available when you enable Abbreviated Dialing feature. (See “Setting Abbreviated Dialing” on page 47.)

Prepend to predefine the first five- or six-digit prefix you wish to use for abbreviated dialing, so that you can dial a number by entering only the last four or five digits of the number. This feature becomes available when you enable Abbreviated Dialing feature. (See “Setting Abbreviated Dialing” on

page 47.)

To place a call using Ph. Book Match abbreviated dialing:

1.Enter the last 3-6 digits of a Contacts entry’s phone number saved in your Contacts.

2.Press or .

To place a call using Prepend abbreviated dialing:

1.Enter the last four or five digits of your desired number.

2.Press or .

Note: If the digits match more than one entry, the Abbrev. Dial list will

be displayed; select the correct entry and press again.

When Prepend is set to Enable and Ph. Book Match is set to Disable, you can display the 10-digit number (including the predefined prepend number) by entering the last four or five digits of the number.

When both Ph. Book Match and Prepend are set to Enable and your desired number is not saved in Contacts, you can display the 10-digit number (including the five- or six-digit prepend number) by entering the last four or five digits of the number.

Tip: You can also place a call by pressing select Abbrev. Dial after step 1 above.

Options

(right softkey) and

24