Sanyo SCP-7050 manual Using Your Phone’s Tools, Using the Alarm Clock, Select Tools Alarm Clock

Using Your Phone’s Tools

Using the Alarm Clock

To set the alarm clock:

1. Select > Tools > Alarm Clock.

Note: To set the alarm clock in a no-service area, press OK (left softkey) in the “Set Current Time/Date” screen.

2.Select a number and press .

3.Select the items you want to edit and press .

Description to enter a description of the alarm.

Time to enter the alarm time. Enter the desired alarm time and press .

Repeat to select the alarm frequency.

Alarm to set the alarm on or off.

4.Press Save (left softkey) to save the alarm settings.

Tip: Press the left softkey (On or Off) to toggle the alarm on and off.

To change the alarm settings, select Settings the ringer length and snooze options.

(right softkey) to set

Note: Alarm will not sound when the phone is powered off. However, depending on the Power On to Alert setting, the alarm setting will be active even if the phone is turned off. (See “Setting Power On to Alert” on page 47.)

To stop the alarm:

Press any key to stop the alarm. (The alarm will stop and then sound again after the selected snooze interval.)

Press and hold the to cancel snoozing.

Press Dismiss (right softkey) to dismiss the alarm.

77