Sanyo SCP-7050 manual Making a 10-4 Call Group Call, Making a 10-4 Call by Entering a Number

Making a 10-4 Call (Group Call)

You can make a 10-4 call to all members in a Group entry, which you have in your 10-4 List. You can communicate with up to five members at a time.

1.Press 10-4(left softkey) or to access the 10-4 List.

2.Press Go to (left softkey), and select the list from which you want to make a Group call (Company Grps. or Personal Grps.) and press .

3.Highlight the group entry you want to call, and press and hold

to place the call and take the floor. (You will see

10-4 calling... and Connecting... followed by “You have floor.”

Continue with the 10-4 call as described previously.)

To make a 10-4 call to a group member, select your desired group, highlight your desired group member, and

press and hold .

If one of the group members takes the floor, you will see the member’s name and 10-4 number on the display.

4.When the call is finished, press .

Tip: The phone beeps if you press when another party has the floor.

You can also make a Group Call after checking the group member. Press to display group members, highlight <Call Group> and

press and hold during step 3 above.

To redial your last 10-4 call, highlight Redial and press from the 10-4 List.

Making a 10-4 Call by Entering a Number

1.From standby mode, enter the 10-4 number you want to dial.

2.Press to place the 10-4 call.

3.Continue with the 10-4 call, pressing and holding to speak and releasing it to allow other parties to reply.

4.When the call is finished, press .

– or –

1.Press 10-4(left softkey) or to access the 10-4 List.

2.Press Go to (left softkey) > Enter 10-4#.

92