|
|
|
|
|
|
|
| EN 47 |
|
| System Menu |
|
|
| |||
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| SYSTEM |
| ( |
| : |
|
|
|
|
|
| |||
Beep, melody and shutter sound |
| |||||||
|
|
|
|
|
|
| ||
| BEEP | OFF | Even though not heard while shooting, shutter sound is recorded on the | |||||
|
|
|
|
|
| tape. |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| BEEP | The beep sounds when the power is turned on or off, and at the | ||
|
|
|
|
|
| beginning and end of recording. It also activates the shutter sound effect. | ||
|
|
|
|
|
| ( pg. 27, 52) |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| MELODY | Instead of a beep, a melody sounds when any operation is performed. It | ||
|
|
|
|
|
| also activates the shutter sound effect. ( pg. 27, 52) |
| |
|
|
|
|
|
|
|
|
|
Tally lamp setting
TALLY
OFF
ON
The tally lamp remains off at all times.
The tally lamp comes on to signal the start of recording.
Automatic demonstration mode
Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate. ( pg. 8)
DEMO MODE | OFF | Automatic demonstration will not take place. |
|
|
|
| ON | Demonstrates certain functions such as Program AE with special effects, |
|
| etc., and can be used to confirm how these functions operate. |
|
| Demonstration starts in the following cases: |
|
| •When the Menu Screen is closed after “DEMO MODE” is turned “ON”. |
|
| •With “DEMO MODE” set to “ON”, if there is no operation for about |
|
| 3 minutes after the Power Switch is set to “A” or “M”. |
|
| Performing any operation during the demonstration stops the |
|
| demonstration temporarily. If no operation is performed for more than 3 |
|
| minutes after that, the demonstration will resume. |
|
| NOTES: |
|
| ● If a cassette is in the camcorder, the demonstration cannot be turned on. |
|
| ● “DEMO MODE” remains “ON” even if the camcorder power is turned off. |
|
| ● If “DEMO MODE” remains “ON”, some functions will not be available. |
|
| After viewing demo, set to “OFF”. |
|
|
|
Navigation time
NAVIGATION OFF
5SEC
15SEC
30SEC
60SEC
The captured image is stored in the memory card as a thumbnail image when the recording time is over the navigation time.
For example, “5SEC” is suitable to record short scenes with the thumbnail images. ( pg. 58) However, the stored thumbnail images may take up a lot of memory. In this case, using the memory card with large capacity is recommended.
