JVC GR-DVP7U manual 78 EN, Connection To a Personal Computer, Using USB cable, Using DV cable

78 EN SYSTEM CONNECTIONS

Connection To A Personal Computer

[A] Using USB cable

Connector Cover*	To USB
	connector
	USB cable (provided)
To USB	PC

[B] Using DV cable

OR

Connector Cover*	DV cable	To DV
To DV	(optional)	connector
	Core filter	Core filter

PC with DV

connector

*When connecting the cable, open the cover.

[A] Using USB cable

This camcorder can transfer still images to a PC by using the provided software.

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

2If you are using the USB connection, set the VIDEO/MEMORY switch to “MEMORY”.

3Turn the camcorder’s Power Switch to “P” while pressing down the Lock Button located on the switch and turn on the PC.

●Refer to the instruction manual of the software on how to transfer a still image to the PC.

NOTES:

●Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the installation of the bundled software and drivers.

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack. (
pg. 11)

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●The system may not work properly depending on the PC or capture board you are using.

“USB MODE” and/or “ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.