82 EN | TROUBLESHOOTING |
If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer.
The camcorder is a
Power
SYMPTOM | POSSIBLE CAUSES |
| CORRECTIVE ACTION |
1. No power is supplied. | 1. •The power is not connected | 1. | •Connect the AC Power |
| properly. |
| Adapter/Charger securely. |
| •The battery is dead. |
| ( pg. 11) |
| •The LCD monitor is not open |
| •Replace the dead battery |
| fully or the viewfinder is not |
| with a fully charged one. |
| pulled out when recording. |
| ( pg. 10, 11) |
|
|
| •Open the LCD monitor fully |
|
|
| or pull out the viewfinder. |
|
|
|
|
Video and D.S.C. Recording
SYMPTOM |
| POSSIBLE CAUSES | CORRECTIVE ACTION |
2. Recording cannot be | 2. •The Power Switch is set to | 2. •Set the Power Switch to “A” | |
performed. |
| “P” or “OFF”. | or “M”. ( pg. 14) |
|
| — For Video Recording — | — For Video Recording — |
|
| •The tape’s erase protection | •Set the tape’s erase |
|
| tab is set to “SAVE”. | protection tab to “REC”. |
|
| •The VIDEO/MEMORY | ( pg. 16) |
|
| Switch is set to “MEMORY”. | •Set the VIDEO/MEMORY |
|
| •“TAPE END” appears. | Switch to “VIDEO”. |
|
| •The cassette holder cover is | •Replace with new cassette. |
|
| open. | ( pg. 16) |
|
| — For D.S.C. Recording — | •Close the cassette holder |
|
| •The VIDEO/MEMORY | cover. |
|
| Switch is set to “VIDEO”. | — For D.S.C. Recording — |
|
|
| •Set the VIDEO/MEMORY |
|
|
| Switch to “MEMORY”. |
|
|
| |
3. When shooting a subject | 3. •This is a result of exceedingly | 3. | |
illuminated by bright light, |
| high contrast, and is not a | — |
vertical lines appear. |
| malfunction. |
|
|
|
|
|
4. When the screen is under | 4. | •This is not a malfunction. | 4. |
direct sunlight during shooting, |
|
| — |
the screen becomes red or |
|
| |
|
|
| |
black for an instant. |
|
|
|
|
|
|
|
5. During recording, the date/ | 5. | •“DATE/TIME” is set to “OFF”. | 5. •Set “DATE/TIME” to “ON”. |
time does not appear. |
|
| ( pg. 38, 48) |
|
|
|
|
