EN 35
10Press + or – to select
“EXECUTE”, and press | DPOF |
SET/SELECT. The |
|
normal playback |
|
screen appears. | AL L 1 ? |
● To cancel selection, |
|
EXECUTE | |
select “RETURN”. | RETURN |
|
To Print By Selecting Still Images And Number Of Prints
1Perform steps 1 – 8 in “To Print All Still Images (One Print For Each)” ( pg. 34).
2Press + or – to select
“CURRENT”, and press SET/SELECT. The DPOF screen appears.
3 Turn the SHUTTLE SEARCH Ring to the left (3) or to the right (5) to select the desired file.
4Press + or – to select the number indication (00), and press SET/SELECT.
5Select the number of
prints by pressing + to increase the number, or – to decrease the number, and press
SET/SELECT.
● Repeat steps 3 through 5 for the desired number of prints.
●The number of prints can be set up to 15.
●To correct the number of prints, select the image again and change the number.
6Press + or – to select
“RETURN”, and press | DPOF |
| |
SET/SELECT. The |
|
“SAVE?” appears. | SAVE? |
● If you did not | |
change any settings |
|
EXECUTE | |
in step 3 through 5, | CANCEL |
| |
the Menu Screen |
|
reappears. |
|
7Press + or – to select “EXECUTE” to save the setting you have just made, and press SET/
SELECT.
● To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1Perform steps 1 – 8 in “To Print All Still Images (One Print For Each)” ( pg. 34).
2Press + or – to select “RESET”, and press SET/ SELECT. The DPOF screen appears.
3Press + or – to select “EXECUTE”, and press SET/ SELECT. The normal playback screen appears.
●To cancel selection, select “RETURN”.
●The number of prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power, as this may cause the memory card to be corrupted.
