EN 59
To add thumbnail images during tape playback
1Perform steps 1 to 4 of “To find scenes on tape using thumbnail images (NAVIGATION Search)”.
2Set “ 
COPY” to “NAVIGATION”. ( pg. 38)
3Press 4/9 to start tape playback.
4Press SNAPSHOT at the desired point.
●The “
” indicator appears and the image of the point where SNAPSHOT is pressed is stored on the memory card as a thumbnail image.
To delete thumbnail images
1Load a memory card. ( pg. 17)
2Set the VIDEO/MEMORY switch to “VIDEO”.
3Set the Power Switch to “P” while pressing down the Lock Button located on the switch.
4Press MENU. The Menu Screen appears.
5Press + or – to select “t VIDEO”, and press SET/SELECT. The VIDEO Menu appears.
6 Press + or – to select
“NAVI.DEL.”, and | SOUND MODE – | STEREO | |
12B I T MODE | – | SOUND 1 | |
press SET/SELECT. The | SYNCHRO | – | O . O |
Sub Menu appears. | REC MODE | – | SP |
COPY | – | OF F | |
7 By pressing + or | NAV I . DEL . | – | OFF |
S /AV INP UT | |||
Select “IMAGE SEL.” to | RETURN |
|
|
delete the currently |
|
|
|
displayed thumbnail image. |
|
|
|
Select “TAPE SEL.” to delete all thumbnail images for the tape which contains the currently displayed image.
Select “ALL” to delete all thumbnail images stored on the memory card at once.
8 | Press SET/SELECT. The | NAV I GAT I ON |
|
| NAVIGATION screen | DELETE CURRENT? | |
9 | appears. |
|
|
Press + or – to select |
|
| |
| “EXECUTE”, and press | MAY 2 6 ’ 0 2 | 3 : 0 0AM |
| SET/SELECT. | EXECUTE |
|
| RETURN |
| |
●Turn the SHUTTLE SEARCH Ring to the
left (3) to display the previous page. Turn the SHUTTLE SEARCH Ring to the right (5) to display the next page.
●To cancel deletion, select “RETURN”.
●Thumbnail images cannot be deleted during tape playback.
CAUTION:
Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Power Adapter/Charger, as the memory card may be corrupted if the battery becomes exhausted during deletion. If the memory card becomes corrupted, initialize it.
NOTE:
Once images are deleted, they cannot be restored. Check images before deleting.
IMPORTANT
●Be sure to always use the same tape and memory card together as they were during recording; otherwise, the camcorder cannot recognize Tape and Memory Card IDs to perform NAVIGATION function properly.
●Check if an appropriate tape and memory card are loaded when the following messages appear: “NO
ID ON TAPE OR CARD”, “UNABLE TO USE NAVIGATION”, “THIS MEMORY CARD IS NOT COMPATIBLE”.
●If you change the memory card while shooting on one tape, two memory cards will share the tape’s thumbnail images. We recommend that you use one memory card for one tape.
●NAVIGATION Search does not work if the current position is at a blank portion on the tape. Also, do not leave a blank portion partway through the tape when shooting; otherwise, NAVIGATION function does not work properly.
●Before shooting newly over a recorded tape, be sure to delete all thumbnail images of the previous recording from the relevant memory card.
●If you copy thumbnail images from one memory card to another via a PC, NAVIGATION Search does not work with the copied memory card.
