76 EN | USING THE REMOTE CONTROL UNIT (cont.) |
Automatic Editing To VCR
Recording Start/
Stop Button
Remote sensor 
START/STOP
PAUSE
R.A.EDIT
ON/OFF
VCR REC
STBY
13Rewind the tape in the camcorder to the beginning of the scene you want to edit and press PAUSE (9).
14Point the remote control towards the VCR’s remote sensor and press VCR REC STBY (79), or manually engage the VCR’s
15 Press START/STOP |
|
| I N |
| OUT | MODE | |
on the remote control. | 1 |
| 00 : 2 5 ~ | 02 : 05 |
| – – | |
2 |
| 07 : 18 ~ | 08 : 31 – – – – | ||||
Editing proceeds as |
| ||||||
3 – – | 0 3 : 33 ~ | 05 : 53 |
|
| |||
|
| ||||||
programmed, right | 4 |
| 09 : 30 | ~ | 13 : 15 |
|
|
5 |
| 15 : 55 | ~ | 16 : 29 | – – – – | ||
through to the end of | 6 – – | – | ~ |
|
|
| |
7 |
|
| ~ |
|
|
| |
the last registered |
|
|
|
|
| ||
8 |
|
| ~ |
|
|
| |
scene.
●When dubbing is
complete, the camcorder enters the Pause mode, and the VCR enters its
●If you do not register an
●If you operate the camcorder during automatic editing, the VCR will enter its
16Engage the Stop modes for the camcorder and the VCR.
To make the R.A.Edit counter display disappear, press R.A.EDIT ON/OFF on the remote control.
NOTES:
●Pressing R.A.EDIT ON/OFF on the remote control clears all settings registered during Random Assemble Editing.
●When the editing cable is connected to the remote control’s PAUSE IN connector during dubbing, make sure the remote control is pointed at the VCR’s sensor, and the path between the two is unobstructed.
●Random Assemble Editing may not function properly when using a tape including several duplicated time codes. ( pg. 21)
