Using Wi-Fi (GZ-EX355/GZ-EX310)

0Tap “STOP” to disconnect.5Connection is established; backup starts. (Indication on this camera)0Tap “STOP” to disconnect. 6 Backup starts.

0Everio Watcher appears on the task bar located on the lower right of the computer screen.

0To see the status of backing up and remaining time, move the arrow to it.7Backup is completed. (Operation on this camera)0Tap “OK”, or wait for about 10 seconds to turn off the power automatically.

Memo :

0After performing “EASY STORAGE”, it is recommended to check that the data is stored correctly.

0From the second time and onward, newly added files are backed up.

Recording the Location Information

You can record the location information of the venue where recording is taking place via direct connection (Wi-Fi Direct) with a smartphone.

Memo :

0To obtain the location information, it is necessary to connect the smartphone to the camera and start the smartphone application.

Also, setting the “LOC INFO TRANS INT” for the smartphone application is necessary.

“Smartphone Application Settings” (A p. 169)0Activate the GPS function of the smartphone in advance.

0The recorded location information can be used on the software provided with this unit.

What You Need

0Smartphone

Settings Required in Advance

Set up your camera and smartphone by performing the following operations. For a smartphone with WPS support, refer to the “Wi-Fi Protected Setup (WPS)”.

*WPS is a method to connect the camera and the smartphone wirelessly by easy button operations.

oConnection by entering the Wi-Fi password

1 Tap “MENU”.

(Operation on this camera)

Set the camera to the recording mode.

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

3Tap the “DIRECT MONITORING” (N) icon in the “Wi-Fi” menu. (Operation on this camera)

130