JVC GZE300BUS, GZEX355BUS Menu Settings

Using Wi-Fi (GZ-EX355/GZ-EX310)

Menu Settings

Setting		Details
DIRECT MONITORING	Configures various settings related to DIRECT MONITORING.
	0	PASSWORD
		Sets the password to access the camera.
	“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
	(A p. 138)
	0	ENFORCED GROUP OWNER (Default: “ON”)
		Set whether or not to get the owner group permissions.
		・OFF: Set this if connection to devices that support Wi-Fi Direct fails. (When set to OFF, connection to
		devices that do not support Wi-Fi Direct will be disabled.)
		・ON: It is recommended to set this usually.
	“Setting the Enforced Group Owner (DIRECT MONITORING)” (A p. 139)
	0	HTTP PORT (Default: “80”)
		Changes the port number to access to the camera.
	“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
	(A p. 139)
INDOOR MONITORING	Configures various settings related to INDOOR MONITORING.
	0	PASSWORD (Default: “0000”)
		Selects the password to access the camera.
	“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
	(A p. 138)
	0	HTTP PORT (Default: “80”)
		Changes the port number to access to the camera.
	“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
	(A p. 139)
OUTDOOR MONITORING	Configures various settings related to OUTDOOR MONITORING.
	0	PASSWORD (Default: “0000”)
		Selects the password to access the camera.
	“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
	(A p. 138)
	0	UPnP (Default: “ON”)
		Sets the UPnP of the camera.
		・OFF: Disables UPnP.
		・ON: Enables UPnP.
	“Setting the UPnP of this Camera (OUTDOOR MONITORING)” (A p. 140)
	0	DDNS SETTING
		Configures various settings related to DDNS.
	“Setting Dynamic DNS on this Camera (OUTDOOR MONITORING)” (A p. 141)
	0	HTTP PORT (Default: “80”)
		Changes the port number to access to the camera.
	“Changing the HTTP Port (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
	(A p. 139)
DETECT/MAIL	Configures various settings related to notification mails.
	0	DETECT/ MAIL ATTN.
		Selects the recipient’s e-mail address for Detect/Mail.
	“Sending Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL)” (A p. 125)
	0	MAIL SETTING
		Sets the e-mail addresses of the sender and recipient.
	“Setting the Sender’s E-mail Address of the Camera” (A p. 142)
	“Registering the Recipient’s E-mail Address of the Camera” (A p. 144)
	0	DETECTION METHOD (Default: “MOTION DETECTION”)
		Sets the detection method to start recording.
		・MOTION DETECTION: Starts recording upon detection of subject’s movements.
		・FACE DETECTION: Starts recording upon detection of human faces.
	“Setting the Detection Method of this Camera (DETECT/MAIL SETTING)” (A p. 146)
	0	DETECTION INTERVAL (Default: “10 minutes”)
		Sets the time period to enable detection again after the previous one.
	“Setting the Detection Interval of this Camera (DETECT/MAIL SETTING)” (A p. 146)
	0	SELF RECORDING (Default: “ON”)
		Sets whether to record videos on this camera during detection.
		・OFF: Does not record videos on this camera.
		・ON: Records videos on this camera.
	“Setting Self Recording on this Camera (DETECT/MAIL SETTING)” (A p. 147)

136