JVC GZE300BUS, GZEX355BUS Wi-Fi, Memo :, (ACCESS POINTS), oWi-FiProtected Setup (WPS) Registration, Registering the Access Points of the Camera to Connect

Using Wi-Fi (GZ-EX355/GZ-EX310)

Setting Self Recording on this Camera (DETECT/MAIL SETTING)

Sets whether to record videos on this camera during detection.

1Tap “MENU”.

(Operation on this camera)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

3Tap “DETECT/MAIL” (P). (Operation on this camera)

4Tap “SELF RECORDING”. (Operation on this camera)

5Tap “ON” or “OFF” to make a selection.

0Select “ON” to record videos on this camera.

0Select “OFF” not to record videos on this camera.

Registering the Access Points of the Camera to Connect(ACCESS POINTS)

There are 4 ways to register the access points (wireless LAN router) for connection.

Wi-Fi Protected	This is the easiest way of registration.
Setup (WPS)	Authentication method and wireless LAN setup are
Registration	performed automatically in WPS, allowing easy
	registration of connection settings between
	devices.
Search and	A search is conducted to locate access points.
Register	Select and register an access point from the list of
	search results.
Manual	Enter the name and authentication method
Registration	manually to register an access point.
WPS PIN	Enter the WPS PIN code of the camera to the
Registration	access point to register.

Memo :

0By registering multiple access points, you can change connection to another access point by tapping on the desired one from the list.

oWi-Fi Protected Setup (WPS) Registration

1Tap “MENU”.

(Operation on this camera)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

3Tap 1on the lower right of the screen. (Operation on this camera)

4Tap “COMMON Wi-Fi SETTING”. (Operation on this camera)

147