Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)

“ABC”, for example, enter “A” by tapping once, “B” by tapping twice, or “C” by tapping 3 times.

0Tap “DELETE” to delete a character.

0Tap “CANCEL” to exit.

0Tap “A/a/1” to select character input type from upper case letter, lower case letter, and number.

0Tap E or F to move one space to the left or right.

0The password is not required if the wireless LAN router is not security protected.

10 After registration is complete, tap “OK” on the camera’s screen. (Operation on this camera)

4Tap “START” (I). (Operation on this camera)

5Start making a connection. (Operation on this camera)

0Other methods, such as “Manual Registration” and “WPS PIN Registration” are also available. Refer to the following link for details.

“Registering the Access Points of the Camera to Connect (ACCESS POINTS)” (A p. 147)

oRegular Operation

Connect the TV to the access point.

0Connect the DLNA compatible TV to the access point (this function is available for a connection via cables as well)

0For details on connecting your TV to a Wi-Fi network, please refer to the instruction manual of the TV in use.

Connecting This Camera to the TV

1Tap “MENU”.

(Operation on this camera)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

3Tap “TV MONITORING” (K). (Operation on this camera)

6Connection in progress

7After the connection is completed, wait for the DLNA device to start up. (Operation on this camera)

0If a considerable number of videos/still images are recorded in the camera, it may take some time to start.

8Images appear on the monitor of the DLNA device (Operation on DLNA device)

0From the following instructions, perform operations on the DLNA device.

For details on using the TV, refer to the instruction manual of the TV in use.

Memo :

0If no image is displayed during TV monitoring, tap “STOP” to start from step 1.

0If the DLNA compatible TV in use cannot detect Everio, tap “STOP” to start from the step 1 again.

205