JVC GZE300BUS, GZEX355BUS VIDEO MAIL, MAIL SETTING, MAIL SETTING, TV MONITORING, ACCESS POINTS, LOCK SETTINGS, INITIALIZATION, MAC ADDRESS LIST, SET FROM QR CODE, ・ON: Enables UPnP

Using Wi-Fi (GZ-EX355/GZ-EX310)

Setting		Details
VIDEO MAIL	0	VIDEO MAIL ADDRESS
		Selects the recipient’s e-mail address for video mails.
	“Sending Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL)” (A p. 125)
	0	MAIL SETTING
		Sets the e-mail addresses of the sender and recipient.
	“Setting the Sender’s E-mail Address of the Camera” (A p. 142)
	“Registering the Recipient’s E-mail Address of the Camera” (A p. 144)
TV MONITORING	0	MAC ADDRESS FILTER (Default: “OFF”)
		By setting to “ON”, Everio can be searched from the device (TV monitor); the MAC address of the device
		needs to be registered to Everio in advance.
		・OFF: Disables UPnP.
		・ON: Enables UPnP.
	“Enabling the MAC Address Filter (TV MONITORING)” (A p. 154)
	0	MAC ADDRESS LIST
		MAC address of the TV monitor can be registered to the camera.
	“Registering the MAC Address (TV MONITORING)” (A p. 154)
COMMON Wi-Fi SETTING	Configures various settings related to the network.
	0	ACCESS POINTS
		Adds, deletes, or perform LAN settings of access points (wireless LAN router).
	“Registering the Access Points of the Camera to Connect (ACCESS POINTS)” (A p. 147)
	0	MAIL SETTING
		Sets the e-mail addresses of the sender and recipient.
	“Setting the Sender’s E-mail Address of the Camera” (A p. 142)
	“Registering the Recipient’s E-mail Address of the Camera” (A p. 144)
	0	MAC ADDRESS (Media Access Control address)
		Displays the MAC address of the camera.
		(The above shows the MAC address when connected to an access point, while the below shows the
		address during direct connection.)
	“Checking the MAC Address of this Camera” (A p. 155)
	0	SET FROM QR CODE
		Perform the Wi-Fi setting after the camera reads the QR code generated by following the instruction in
		Detailed User Guide.
	“Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)” (A p. 180)
	0	LOCK SETTINGS
		Sets a password to prevent others from seeing the network settings.
	“Protecting the Network Settings with a Password” (A p. 155)
	0	INITIALIZATION
		Returns the network settings to their default values.
	“Initializing the Wi-Fi Settings” (A p. 156)

137