Using Wi-Fi by Creating a QR Code (GZ-EX355/GZ-EX310)

8DETECT/MAIL detection standby

0Detection is suspended for the first 5 seconds.

9DETECT/MAIL detection in progress (an e-mail is automatically sent out after detection is completed)

0The “PHOTO” icon appears on the screen for about 2 seconds upon detection.

0Images are captured automatically when moving subjects or human faces appear on the camera’s screen. (The PHOTO icon appears on the screen upon detection.)

0The captured still images will be sent via e-mail to the selected recipients.

10 Detection suspended

0Until the next detection is made, detection is suspended for the pre- set length of time.

0“DETECTION INTERVAL” can be selected from 15 seconds, 1 minute, 3 minutes, 10 minutes, 30 minutes and 60 minutes.

“Setting the Detection Interval of this Camera (DETECT/MAIL SETTING)” (A p. 146)

Check the incoming e-mail.

VIDEO MAIL

oSetting (Once setting is done, start from the “Regular Operation” below)

Create a QR code.

Memo :

0Perform operations in step 2 and 3 after creating a QR code, and read the QR code one by one by the camera.

oEnter values in the required items for setting the recipient’s e-mail address.

0E-mail address: set the recipient’s e-mail address.

0E-mail function: set the function of the e-mail that is transmitted to the recipient’s e-mail address.

0Up to 8 e-mail addresses can be set.

0Start reading from (1) if multiple e-mail addresses are set. Click the number or “<”, “>”.

oEnter values in the required items for setting the sender’s e-mail address.

0E-mail address: set the sender’s e-mail address.

oEnter values in the required items for setting the e-mail server (SMTP server).

0SMTP server: set the name of the e-mail server (SMTP server) from which an e-mail account is obtained.

0SMTP port number: set according to the condition when the e-mail account is obtained. Normally set to “25”.

0SMTP authentication method: set according to the condition when the e- mail account is obtained.

0User name: set if the SMTP authentication method is set to other than “None”. (same as the registered user name (account name) when the e- mail account is obtained)

0Password: set if the SMTP authentication method is set to other than “None”. (same as the registered password when the e-mail account is obtained)

Display the screen for reading the QR code.

1Tap “MENU”.

(Operation on this camera)

0The top menu appears.

2Tap the “Wi-Fi” (Q) icon. (Operation on this camera)

3Tap 1on the lower right of the screen. (Operation on this camera)

198