JVC HD-DH40000U 16 EN, Setting cable box input channel & brand, Turn on cable box, Access Main Menu screen on VCR, 4Select cable box input channel

16 EN INITIAL SETTINGS (cont.)

●Turn on the VCR and the TV, and select the AV mode on the TV.

●Set the VCR/TV/CABLE/DBS selector on the Remote to “VCR”.

VCR CABLE

TV /DBS

27 3– 6

Setting cable box input channel & brand

After installation, set the cable box input channel and its brand correctly; otherwise, the Controller cannot work correctly.

		Turn on cable box
1 Select a channel other than channel 9 on your
		cable box.
		Access Main Menu screen on VCR
2 Press MENU.
3
		Access Cable Set Up screen
	1 Press @# to move		FUNCTION SET UP	TUNER SET UP INITIAL SET UP
		the arrow to	TUNER SET		CABLE SET UP DBS SET UP
		“TUNER SET UP”,	INPUT CH			OFF
		then press fi or	BRAND
						1
			TEST MODE
		OK.
	2 Press @# to move
			MENU	OK	SELECT WITH ARROW KEYS
		the arrow to	EXIT	SELECT	THEN PRESS [OK]

“CABLE SET UP”, then press fi or OK.

4Select cable box input channel

Press %fi to move	FUNCTION SET UP	TUNER SET UP INITIAL SET UP
the arrow to “INPUT	CABLE SET UP
CH”.	INPUT CH		OFF
	BRAND		1
Your selection
	TEST MODE
depends on how your
cable box is	MENU	OK	SELECT WITH ARROW KEYS
connected to your	EXIT	SELECT	THEN PRESS [OK]

VCR.

●If your cable box is connected to your VCR’s ANTENNA IN terminal on the rear panel Press @ # until the channel number representing the cable box’s output (ON CH2 – ON CH9) appears on the screen.

●If your cable box is connected to your VCR’s AUDIO/VIDEO IN connectors on the front panel Press @ # until “ON F-1” appears on the screen.

●If your cable box is connected to your VCR’s AUDIO/VIDEO IN (L-1) or AUDIO/VIDEO IN (L-2) connectors on the rear panel

Press @ # until “ON L-1” or “ON L-2” appears on the screen.

●If you do not use a cable box

Press @ # until “OFF” appears on the screen.