JVC HD-DH40000U Basic Connection, OUT, Cord, (not, Input, Input, ANTENNA, Matching, To Audio, To Video, AC Outlet, AUDIO OUT, VIDEO OUT, supplied), ANTENNA IN, (supplied)

Check contents

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” (
pg. 87).

Situate VCR

Place the VCR on a stable, horizontal surface.

INSTALLING YOUR NEW VCR EN 7

Connections

Antenna or Cable

			ANTENNA IN
			(Antenna or cable input)
	Coaxial Cable
Flat Feeder
	Matching
AC Outlet	Transformer
	(not supplied)
AC Power
Cord
			COMPONENT		VHF/UHF
					ANTENNA
			VIDEO OUT
	Y	PB/CB	PR/CR		IN
	OUT			IN		i.LINK IN/OUT
						DV IN
	S VIDEO		IN(L-1)	S VIDEO		S400
	CABLE BOX				ANTENNA	DIGITAL OUT
	REMOTE PAUSE/R AUDIO L VIDEO		R AUDIO L	VIDEO	OUT	OPTICAL
						PCM/DOLBY DIGITAL
	AV COMPULINK
						D THEATER
			IN(L-2)			REGION 1
Back of VCR
AUDIO OUT		VIDEO OUT				ANTENNA
						OUT
Audio Cable
(supplied)		Video Cable
To Audio		(not
Input		supplied)
Connectors
	To Video
	Input
	Connectors
			RF Cable
			(supplied)
	To 75 Ω terminal
TV

Basic Connection

1

2

3 Connect VCR to TV

The following connections are required.1Disconnect the TV antenna from the TV.

2Connect the TV antenna cable to the ANTENNA IN terminal on the rear of the VCR.

3Connect the supplied RF cable between the ANTENNA OUT terminal on the rear of the VCR and the TV’s antenna input terminal.

4Connect an audio/video cable between the AUDIO/VIDEO OUT connectors on the rear of the VCR and the audio/video input connectors on the TV.

S-VIDEO Connection●If you have a TV with S-VIDEO input terminals, see “S-VIDEO Connection” on page 8.Component Video Connection

●If you have a TV with component video input terminals, see “Component Video Connection” on page 8.

4 Connect VCR to power source Connect the AC power plug to the AC outlet.

●The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is first connected to an AC power outlet (
pg. 9).

(If “Auto” or channel numbers are displayed on the front display panel before the VCR is turned on, the clock and tuner channels are being set automatically. Wait until the clock time is displayed on the front display panel before turning on the VCR.)

5 Final preparation for use Turn on the VCR.●You can now perform basic playback(
pg. 21) or basic recording (
pg. 26).

NOTES:

●Your TV must have audio/video input connector for the connection to the VCR.

●Even if you are using audio/video cables to connect your VCR to your TV, you must also connect it using the RF cable. This will ensure that you can record one show while watching another (
pg. 29).

●For full identification of the VCR’s rear panel, refer to the Index (
pg. 83).

●If you cannot see the pictures on the TV screen when you play back a tape, set “TV OUTPUT 1” to the appropriate mode (
pg. 56).