74 EN

 

TROUBLESHOOTING (cont.)

 

 

 

 

 

 

 

 

 

TIMER RECORDING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYMPTOM

 

POSSIBLE CAUSE

 

 

CORRECTIVE ACTION

 

 

7. Satellite channels are not

 

● The Controller is not properly

 

 

Connect the Controller correctly

 

 

 

automatically switched during timer

 

connected to the VCR.

 

 

( pg. 18).

 

 

 

recording.

 

● The input channel selected on the

 

 

After confirming your DBS receiver’s

 

 

 

 

 

DBS Receiver Set screen is incorrect.

 

 

input channel number, re-access the

 

 

 

 

 

 

 

 

DBS Receiver Set screen and select

 

 

 

 

 

 

 

 

the correct number ( pg. 19).

 

 

 

 

 

● The VCR is not set correctly to control

 

 

Set the correct DBS receiver brand

 

 

 

 

 

the DBS receiver.

 

 

code ( pg. 20).

 

 

 

 

 

● The DBS receiver is turned off.

 

 

Make sure the power is on before

 

 

 

 

 

 

 

 

timer recording starts.

 

 

 

 

 

 

 

 

 

 

 

8.

Timer recording begins as

 

● Even though you do not use an

 

 

Set “INPUT CH” to “OFF”

 

 

 

scheduled, but the channel is

 

external cable box or DBS receiver,

 

 

( pg. 16, 19).

 

 

 

always incorrect.

 

on the Cable Set Up screen or DBS

 

 

 

 

 

 

 

 

Receiver Set screen, “INPUT CH” is

 

 

 

 

 

 

 

 

set to “ON”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9.

You moved, and now VCR Plus+

 

● The receivable stations in the new

 

 

Re-perform the Changing VCR Plus+

 

 

 

system does not work properly.

 

area are received on different

 

 

Setting procedure ( pg. 36).

 

 

 

 

 

channels than those in the previous

 

 

 

 

 

 

 

 

area.

 

 

 

 

 

 

 

 

 

 

 

 

 

10.“PROGRAM FULL” is displayed on

 

● All 24 programs of the VCR’s timer

 

 

Wait until a space in memory clears,

 

 

 

the screen.

 

memory are used.

 

 

or cancel unnecessary program

 

 

 

 

 

 

 

 

information ( pg. 40).