20 EN

INITIAL SETTINGS (cont.)

VCR CABLE TV /DBS

5Enter DBS Receiver’s brand

Press %fi to move

FUNCTION SET UP

TUNER SET UP INITIAL SET UP

the arrow to

DBS SET UP

 

 

“BRAND”.

INPUT CH

OFF

BRAND

40

Press @ # to enter the

TEST MODE

 

brand code from the

 

 

 

following list.

MENU

OK

SELECT WITH ARROW KEYS

 

EXIT

SELECT

THEN PRESS [OK]

 

 

BRAND

 

 

CODE
JVC (DISH Network)

 

 

51

ECHOSTAR (DISH Network)

 

51

SONY (DSS)

 

 

41

RCA (DSS)

 

 

40

6 Engage test mode

Press %fi to move the arrow to “TEST MODE”, then press OK.

The program currently received through the DBS receiver appears for about 10 seconds.

7NOTE:

56

If you do not engage the test mode in step 6, “INPUT

 

 

CH” and “BRAND” are not set.

 

 

 

● If the DBS receiver’s channel changes to 205,
setting is complete

 

 

Press @ # to move

FUNCTION SET UP

TUNER SET UP INITIAL SET UP

 

 

the arrow to “YES”,

 

 

DBS SET UP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

then press OK and

 

 

INPUT CH

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

“DBS RECEIVER

 

 

DID YOUR DBS RECEIVER CHANGE TO

 

 

 

 

 

 

 

 

 

CHANNEL 205?

 

 

 

 

 

CONTROL IS ON”

 

 

 

YES

 

NO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appears on the

 

 

 

 

 

 

 

 

 

 

MENU

OK

SELECT WITH ARROW KEYS

 

 

screen for about 5

 

EXIT

SELECT

THEN PRESS [OK]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

seconds.

 

 

 

 

 

 

 

 

 

 

 

● If the DBS receiver’s channel does not change

 

 

as shown above

 

 

 

 

 

 

 

 

 

NOTES:

 

1 Press @ # to move the arrow to “NO”.

 

2 Press OK.

 

 

 

 

 

 

 

 

 

● The Controller may not work with all types of DBS receiver.

 

3 Re-enter the correct code.

 

 

 

 

 

● If your DBS receiver does not respond to the code, you

 

 

 

 

 

 

 

 

 

 

 

 

 

Return to normal screen

 

 

 

 

 

 

cannot use the Controller to change satellite channels. In this

 

 

 

 

 

 

 

case, make sure to leave the DBS receiver turned on and7 Press MENU.

 

 

 

 

 

 

 

 

 

tuned to the proper channel before the scheduled start time of timer recording. In addition, if your DBS receiver is equipped with a timer, you can also use “Satellite Auto Recording”

( pg. 62).

●The VCR can only change the satellite channel through the Controller during timer recording.

●If your DBS receiver cannot be operated with a Remote (because it has no remote sensor), you cannot use the Controller to change its channels. Make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording.

●For customers in U.S.A.: If you are unable to set the Controller, contact JVC toll free at 1-800-252-5722.