JVC HD-DH40000U 58 EN, OUT, OUT, LINK, PAUSE, terminal, To AUDIO, To REMOTE, To S VIDEO, (VCR ONLY),
S-VHSMODE, To AV COMPU, To AUDIO IN, To S-VIDEOIN, AV COMPULINK

58 EN	OTHER USEFUL FUNCTIONS (cont.)
	* The default setting is bold in the table below.
S-VHS MODE	You can determine which recording mode — either S-VHS mode or VHS mode — is
ON	used for recording on D-VHS and S-VHS tapes.
	When this function is set to “ON”, you can record on D-VHS and S-VHS tapes with
OFF
	S-VHS picture quality.
	When this function is set to “OFF”, you can record on D-VHS and
	S-VHS tapes with VHS picture quality.
	NOTES:
	● To record in S-VHS/VHS mode on D-VHS tape, press D-VHS to turn off the D-VHS indicator.
	● S-VHS mode allows you to make high quality video recordings with horizontal resolution of 400
	lines, comparing with the 230 lines of resolution of conventional VHS recordings. To achieve the
	highest quality picture we recommend to record in S-VHS mode. (But remember that a
	conventional VHS VCR without SQPB cannot play back S-VHS tapes recorded in S-VHS mode.)
	● S-VHS MODE setting does not affect recording on VHS tapes. Recording on VHS tapes is always
	performed in VHS mode except when using S-VHS ET mode ( pg. 59).
AV COMPU-LINK	The REMOTE PAUSE/AV COMPULINK terminal on the rear panel can be used as either
ON	the REMOTE PAUSE terminal or the AV COMPULINK terminal.
OFF	When this function is set to “ON”, you can use this terminal as the AV COMPULINK
	terminal.
	By connecting other JVC’s AV COMPULINK components (see the diagram below),
	including amplifiers (or receivers) and televisions, one touch control of the audio and
	video components linked via their AV COMPULINK connectors becomes possible.
	For example: simply load a cassette in the VCR and press PLAY ( 3 ) so that the AV COMPULINK
	components automatically turn on, the TV’s AV mode is selected and the VCR starts playback. (You
	do not have to press PLAY ( 3 ) if the cassette’s record safety tab is removed.)
	When this function is set to “OFF”, you can use this terminal as the REMOTE PAUSE
	terminal ( pg. 67).

NOTES:

●When the remote control code is set to “C” or “D”, the connector cannot be used as AV COMPULINK terminal even if “AV COMPU-LINK” is set to “ON”. It is recommended to set the remote control code to “A” when you use this function. ( pg. 71).

●Connection varies depending on the type of JVC TV you have. Refer to the TV’s instruction manual when making this connection.

AV COMPU LINK			This VCR
	Television
				COMPONENT	VHF/UHF
				VIDEO OUT	ANTENNA
			Y	PB/CB PR/CR	IN
			OUT	IN		i.LINK IN/OUT
					S VIDEO	DV IN
			S VIDEO	IN(L-1)		S400
		CABLE BOX			ANTENNA	DIGITAL OUT
		REMOTE PAUSE/	R AUDIO L VIDEO	R AUDIO L VIDEO	OUT	OPTICAL
						PCM/DOLBY DIGITAL
		AV COMPULINK
						D THEATER
				IN(L-2)		REGION 1
	To AV COMPU	To REMOTE		To S VIDEO
To S-VIDEO IN		PAUSE/		OUT
	LINK II
	(VCR ONLY)	AV COMPULINK
	To AUDIO IN
				To AUDIO
	Mini-plug cable (not supplied)			OUT

Audio cable (supplied)S-video cable (supplied)