Select JLIP ID Set Up screen
Access Main Menu screen Press MENU.

EN 63

JLIP ID Number Setting

●Turn on the VCR and the TV, and select the AV mode on the TV.

●Set the VCR/TV/CABLE/DBS selector on the Remote to “VCR”.

VCR CABLE

TV /DBS

14

23

 

The JLIP (Joint Level Interface Protocol) terminal is used to connect the VCR to a personal computer or similar device. By connecting through the JLIP terminals, you can control the VCR during editing and certain other operations, from the connected personal computer or similar device.

When connecting this VCR to another device using the JLIP terminals, each device must have a different JLIP ID number.

The JLIP ID number of this VCR is preset to “1” when shipped from the factory. You can change this number to any other number between 1 to 99.

To change the JLIP ID number of this VCR, follow the procedure below.

1

2 1 Press @ # to move the arrow to “INITIAL SET UP”, then press fi or OK.

2Press @ # to move the arrow to “OTHER”, then press fi or OK.

3Set JLIP ID Number

Press %fi to move

FUNCTION SET UP TUNER SET UP INITIAL SET UP

the arrow to

CLOCK SET

GUIDE CHANNEL

OTHER

 

 

 

 

“JLIP ID”.

 

JLIP ID

1

 

 

 

 

Press @ # to enter the

 

LINC

AUTO

 

 

RESET NUMBER

 

desired ID number.

 

 

 

 

 

MENU

OK

SELECT WITH ARROW KEYS

 

EXIT

SELECT

THEN PRESS [OK]

 

 

 

 

4Return to normal screen

Press MENU.

NOTE:

For further details on the JLIP system or devices, consult your nearest JVC dealer.

U.S. customers can contact JVC directly toll free at 1-800-252- 5722.