Access i.LINK Set Up screen
Access Main Menu screen Press MENU.

60 EN

OTHER USEFUL FUNCTIONS (cont.)

i.LINK Set Up

●Turn on the VCR and the TV, and select the AV mode on the TV.

●Set the VCR/TV/CABLE/DBS selector on the Remote to “VCR”.

VCR CABLE

TV /DBS

i.LINK set up for connected device

When you connect i.LINK compatible devices to this VCR, an i.LINK device number is assigned to each device in the order of connection.

If you want to change the number, follow the procedure below.

1

2 1 Press @ # to move the arrow to “INITIAL SET UP”, then press fi or OK.

2Press @ # to move the arrow to “OTHER”, then press fi or OK.3Confirm LINC setting
Check that “LINC” is

FUNCTION SET UP

TUNER SET UP INITIAL SET UP

set to “AUTO”. If not,

CLOCK SET

 

GUIDE CHANNEL

OTHER

 

 

 

 

press %fi to move

JLIP ID

1

 

LINC

AUTO

 

the arrow to “LINC”,

 

RESET NUMBER

 

then press @ # to set

 

 

 

 

to “AUTO”.

MENU

OK

SELECT WITH ARROW KEYS

 

EXIT

SELECT

THEN PRESS [OK]

 

 

 

 

15

2- 4

 

4Reset NumberPress %fi to move the arrow to “RESET NUMBER”, then press OK.

FUNCTION SET UP

TUNER SET UP

INITIAL SET UP

CLOCK SET

 

GUIDE CHANNEL

OTHER

JLIP ID

 

1

 

LINC

 

AUTO

 

RESET NUMBER

 

 

MENU

OK

SELECT WITH ARROW KEYS

EXIT

SELECT

THEN PRESS [OK]

 

 

 

 

ATTENTION

If the i.LINK setting does not work, press D-VHSand STOP/EJECT ( 7/0 ) simultaneously for more than 5 seconds to reset the settings. The cassette is automatically ejected.

LINC

You can control one of the i.LINK-compatible devices connected to this VCR with the i.LINK cable. “LINC” means to select one of the connected devices. After establishing a LINC with an i.LINK-compatible device, you're ready to control the i.LINK device.

LINC (Logical Interface Connection) involves establishing a logical connection, as the abbreviation implies.

5Return to normal screen

Press MENU.

6 Set Number againConnect the external devices one by one.

•Make sure to connect the VCR's AC power plug to the AC outlet and turn on the external device before connection.

•Each device will be numbered in the order of connection.

NOTES:

●If you do not want to set i.LINK device number, set “LINC” to “OFF” in step 3.

●You cannot use the i.LINK connection depending on the types of camcorder equipped with the DV connector. In this case, set “LINC” to “OFF” in step 3.