JVC HD-DH40000U 78 EN, Error Codes and Messages, CODE, MESSAGE, DESCRIPTION

78 EN TROUBLESHOOTING (cont.)

Error Codes and Messages

Some error codes and messages may appear on the TV screen when operating the VCR. Refer to the chart below for the solution.

CODE	MESSAGE	DESCRIPTION
102	REC PROHIBITED	● An attempt was made to make a D-VHS recording of a program for
		which only the analog information is copy protected.
		● While making a D-VHS recording of a program, a signal in which
		only the analog information is copy protected was input to this VCR.
103	REC PROHIBITED	● An attempt was made to dub a D-VHS recording of a digitally copy
		protected program.
		● While dubbing a D-VHS recording, digitally copy protected
		information was input to this VCR.
		● This VCR supports copy protection technologies such as DTLA, and
		cannot record programs that employ digital copy protection.
104	CAN NOT DECODE VIDEO OR AUDIO	● A signal that is not compatible with this VCR was input.
	USE SET TOP BOX OR HDTV TUNER	● Switch to the analog input for recording. (It may be possible to play
		back the material if using a digital tuner*, etc.)
105	CAN NOT REC DIGITAL INPUT BY	● An attempt was made to make an S-VHS/VHS recording of a signal
	S-VHS/VHS	from an i.LINK device other than a digital tuner*.
	CHOOSE ANALOG INPUT	● The i.LINK connector on this VCR is intended only for D-VHS
		recording. This VCR does not convert a digital signal into an analog
		signal for recording. Switch to the analog input for recording.
107	CAN NOT REC DIGITAL INPUT BY	● An attempt was made to make an S-VHS/VHS recording using the
	S-VHS/VHS	timer function with “i.LINK” selected on the digital tuner* side.
	USE ANALOG TIMER PROGRAMMING	● The i.LINK connector on this VCR is intended only for D-VHS
		recording. This VCR does not convert a digital signal into an analog
		signal for recording. Also, it is not possible to make a D-VHS
		recording on VHS tape. Switch to the analog input for recording.
108	REC BY HS MODE	● When 720p, 1080i signals are recorded in STD/LS3/LS5 mode, select
		HS mode to record program properly.
200	CAN NOT DECODE VIDEO OR AUDIO	● An attempt was made to play back a signal that is not supported by
	USE SET TOP BOX OR HDTV TUNER	this VCR.
		● To play back the signal, use the digital tuner*, etc., that was used to
		record the signal.
201	WAIT A MINUTE	● Normal playback is being prevented by mosaic noise, etc.
	CALIBRATING. . .	● Wait while the VCR calibrates itself so that it can output a normal
		image.
202	COPY RESTRICTED PROG OUTPUT	● When playing back a program that was copy protected in 1080i,
	480i VIDEO	720p, or 480p mode, the VCR down-converts to 480i mode for output.
203	COPY RESTRICTED PROG CAN NOT	● An attempt was made to play back a tape containing a copy protected
	PLAY BACK	program.
		● Even if you record a copy protected program, this VCR cannot play it
		back.
205	CAN NOT PLAY BACK THIS TAPE	● An attempt was made to play back a tape containing an invalid
		D-VHS recording.
300	CAN NOT DECODE VIDEO OR AUDIO	● A signal format that is not supported by this VCR was input.
	USE SET TOP BOX OR HDTV TUNER	● Use a digital tuner*, etc.
301	TOO MANY i.LINK INSTRUMENTS	● A signal containing too much data was input to the i.LINK connector
	READ INST.BOOK	on this VCR.
		● There are too many devices with i.LINK connectors, such as digital
		tuners and digital video cameras, connected to the i.LINK connector
		on this VCR. Turn off any devices that are not in use.
302	COPY RESTRICTED PROG OUTPUT	● When playing back a program that was copy protected in 1080i,
	480i VIDEO	720p, or 480p mode, the VCR down-converts to 480i mode for output.

* For details of a digital tuner, refer to the instruction manual of the digital tuner.