76 EN

 

TROUBLESHOOTING (cont.)

 

 

 

 

 

 

 

 

 

OTHER PROBLEMS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYMPTOM

 

POSSIBLE CAUSE

 

 

CORRECTIVE ACTION

 

 

1.

When scanning channels, some of

 

● Those channels have been preset to

 

 

If you need the skipped channels,

 

 

 

them are skipped over.

 

be skipped.

 

 

restore them ( pg. 14).

 

 

 

 

 

 

 

 

 

 

 

2.

The channel cannot be changed.

 

● Recording is in progress.

 

 

Press PAUSE ( 8 ) to pause the

 

 

 

 

 

 

 

 

recording, change channels, then

 

 

 

 

 

 

 

 

press PLAY ( 3 ) to resume recording.

 

 

 

 

 

 

 

 

 

 

 

3.

The Remote will not operate your

 

● The brand codes are set incorrectly.

 

 

Reset the correct brand codes

 

 

 

TV or cable box or DBS receiver.

 

 

 

 

( pg. 68 – 70 ).

 

 

 

 

 

 

 

 

 

 

 

4.

Even though Auto or Semiauto

 

● The clock setting data received from

 

 

Select a different host channel during

 

 

 

Clock Set has been performed, the

 

the host channel is incorrect.

 

 

Semiauto Clock Set ( pg. 11), or

 

 

 

clock is incorrect.

 

 

 

 

perform Manual Clock Set ( pg. 12).

 

 

 

 

 

 

 

 

 

 

 

5.

“PM” blinks on the front display

 

● The VCR do not work properly.

 

 

Unplug the AC power plug once, then

 

 

 

panel.

 

 

 

 

plug it again.

 

 

 

 

 

 

 

 

 

 

 

6.

The subtitles and the menu screen

 

● The subtitle display on the TV is set

 

 

Set it to off.

 

 

 

are overlapped.

 

to on.

 

 

 

 

 

 

 

 

 

 

 

 

 

MOISTURE CONDENSATION

Moisture in the air will condense on the VCR when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form on the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the VCR turned on for a few hours to evaporate the moisture before inserting a tape.

ABOUT HEAD CLEANING

Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or interrupted. Be sure to contact your nearest JVC dealer if such troubles occur.

ATTENTION

This VCR contains microcomputers. External electronic noise or interference can cause microcomputer to malfunction. If the VCR does not operate correctly switch its power off and unplug the AC power cord from the AC supply. Wait for a while and then plug the power back in. Eject and check the condition of the cassette. If everything appears normal, you can operate the VCR as usual.